Remote Mini Real Time GPS Tracker TCP 4G GPS Tracking For Fleet Vehicles
GPS Tracker and Real Time Remote Location Function Fleet Management Mini GPS Locator
Main Feature: (4G Vehicle GPS Tracker)
* Built-in GPS Vehicles locator
* Support 4G network 4-frequency GSM 850/900/1900/2100 MHz which can Work worldwide
* Support track the real time address by Google link
* Built-in 150 mAh battery, When the engine starts will charge,no worry outage
* Support Geo Fence Alarm
* Main Power Off Alarm (with built battery only)
* Support single location
* Support Over Speed Alarm
* Support Low Power Alarm
* IP67, Waterproof
* With ACC to detect ignition
* Voltage: 9-80V DC
Functions: (4G Vehicle GPS Tracker)
Remote Audio Monitoring , Remote Power/Fuel OFF , SOS Alarm , ACC Engion Detection , Power OFF Alarm , Overspeed Alarm , Vibration Alarm , Move Alarm , ACC Illegal Engion Alarm , etc.
Specification: (4G Vehicle GPS Tracker)
| Model | iSV-GTX01(4G) |
| GSM Module | SIMCOM A7670C |
| Communication Band | LTE/4G |
| LTE-FDD: B1/B3/B5/B8, LTE-TDD: B34/B38/B39/B40/B41 | |
| GPRS | Class12, TCP/ IP Build in GSM Module |
| GPS Chipset | ZKM AT6558D |
| Location Mode | GPS+BDS+LBS 3Modes |
| GPS / GSM Antenna | Built-in |
| GPS Channels | 64~66 |
| GPS Sensitivity (Tracking) | -165dBm |
| Acquisition Sensitivity (Tracking) | -148dBm |
| GPS Frequencies | L1:1575.42±1.023MHz |
| BDS Frequencies | B1:1561.098±2.046MHz |
| GPS Starting Time | Hot start: < 2 Sec (Open Sky) |
| Cold start: < 30 Sec (Open Sky) | |
| GPS Position Accuracy | <10 Meters |
| GPS Velocity Accuracy | 0.1 m/s |
| Voice Monitoring Range | 5 Meters |
| Backup Battery | 15mAh / 3.7V |
| Data Transmit | TCP, SMS |
| Over Speed Alarm | Support |
| Low Power Alarm | Support |
| Movement Detection | Support |
| Kilometer Report | Support |
| ACC Detection Function | Support |
| Oil Cut OFF | Support |
| Vibration Alarm | Support |
| History Playback | Support 1 Months |
| LED Indicators | 2 LED Indicator: GPS-blue / GSM-red |
| Input Voltage | 9-80V DC |
| Waterproof | IP67 |
| Operating Temperature | -20°C - 70°C |
| Operating Humidity | 5% - 95% Non-condensing |
| Weight | 68g |
| Dimension(L*W*H) | 90.6 * 34 * 20mm |
Terminal Wring Dgram:
Relay wiring diagram shows how to wire the relay to control the fuel pump:
Connect the 85 terminal(with small white cable) to the positive pole of the vehicle power (+12V/+24V), connect the 86 terminal(with small yellow cable) to the yellow cable of the terminal.
Cut off the positive pole of the fuel pump, next connect the positive pole to the 87a terminal(with thick green cable) of the relay, and connect another pole to 30 terminal(with thick green cable), showing as in the figure.
Notice: Be sure that the voltage of the vehicle power should match up to the working voltage of the relay, or the relay will be damaged.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.