UVOZ-1200 Ozone Gas Analyzer Accurate Measurement By Photometric Absorption
UVOZ-1200 Ozone Gas Analyser
The UVOZ-1200 uses an advanced dual-light UV light source system with a lamp intelligent management system, which enables the UV lamp to reach the measurement state quickly after switching on. Accurate measurement by photometric absorption principle according to Lambert-Beer's law. Foreign long life UV light source system (wavelength 253.7nm), Indoor installation with power and signal terminals. Built-in temperature and pressure compensation and display, with automatic compensation of the light source. User can choose between manual zero calibration and automatic zero calibration according to the operating status, automatic zero calibration time can be set.
- The core component adopts UV long life light source system with high transmittance quartz sheet to ensure the stability of the zero point and prevent the zero point drift from affecting the accuracy of the detection concentration.
- According to the foreign light cell technology design of pressure-resistant, impact-resistant independent light cell structure, zero calibration operation gas flow, pressure, flow rate remains unchanged, to prevent the impact of airflow on the zero calibration, without closing the ozone inlet can complete the zero calibration operation, to ensure that the equipment can be 24 hours a day continuous operation.
- Display units: g/Nm3, mg/NL, %WT, ppm , mg/Nm3 optional.
- HD colour touch screen, high concentration range setting for incoming gas mass flow rate, real time display of yield.
It is mainly used for continuous detection of ozone gas in various industrial environments, and can also be used to detect ozone gas in operating pipelines, vessels and other environments.
| Model | UVOZ-1200 |
| Measuring range | 0-200g/Nm3 |
| Optional ranges | 0-300g/Nm3, 0-100g/Nm3, 0-50g/Nm3, 0-1000ppm |
| Sampling method | positive pressure sampling, negative pressure sampling (optional) |
| Display interface | 4.3" touch screen operator interface |
| Content interface | Ozone concentration, temperature, pressure |
| Display units | g/Nm3, mg/NL, %WT optional |
| Display resolution | 0.01g/Nm3 |
| Gas flow | 0.5L ± 0.2L/min |
| Concentration error | 0.3% FS max |
| Linearity error | 0.2% FS max |
| Zero point drift | <±0.3%.FS |
| Response time | 0.03 s for signal, 0.3 s for display |
| Ambient temperature | -20 to 50°C |
| Tandem sample aperture | Φ8 (8mm*6mm) (optional) |
| Bypass sampling aperture | Φ6 (6mm*4mm) |
| Communication method | RS-485 |
| Output mode | 4-20mA (active) |
| Power supply | AC 110-220V |
| Dimensions | 160mm (H) x 260mm (W) x 300mm (D); |
| Note | 1mg/L = 1g/m3 = 467PPM. |
| Free warranty | 24 months (mainframe sensor) |
O3 analyzer,Gas ozone concentration analyzer,Ozone pollution monitor,Ozone concentration detector,Tabletop ozone detector,OEM/ODM service.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.