Uv Flammable Open Path Infrared Gas Detector Mic200 For Liquefied Gas Tank
MIC200 Infrared Flammable Gas Detector
The 3-band infrared flame detector is a high quality and reliable flame detector that uses advanced flame analysis and identification technology. It responds quickly to infrared radiation in fires and has the highest immunity to false alarms. The detector contains three narrowband infrared sensors (4-6 µm) and an optical filter, which is sensitive to the CO2 emission spectrum (4.4 µm). It has a high sensitivity, which can effectively eliminate interference and achieve effective flame detection at a longer distance.
|
Response spectral range
|
4-5um
|
| Response time |
5--10s The response time of different media is different
|
| Viewing angle range |
90 °
|
| Detection distance |
30--50 meter (depends on the burning material)
|
| Ambient temperature |
-10 ~ 55 ℃
|
| Environmental humidity |
≤95% RH
|
| Pressure range |
86 ~ 106Kpa
|
| Working voltage | DC24V |
| Working current | current≤25mA, alarm current≤35mA |
| Executive standard | GB15631-2008, GB3836- 2000 series |
| Explosion-proof grade |
EXdⅡCT6
|
| Protection grade |
IP66
|
| Signal output | 4~20mA three-wire system output |
| Installation method | wall or ceiling |
| Cable outlet thread | 20mmX1.5mm free conversion G1 / 2 optional |
| Dimensions |
19*16*11 cm
|
| Shell material |
aluminum alloy, surface anticorrosive paint sprayed
|
| Weight | 1.7 Kg |
| Advantages | dustproof, explosion-proof, corrosion-proof |
- Double band pass filters that fully compensate for all types of fog, rain and/mist interference
- 100% Solar Immune
- Correct operation under partial obscuration conditions
- High vibration resilience
- Radially symmetrical and bonded window heating delivers good low temperature performance
- Coaxial optics delivers best in class performance and resilience to partial obscuration
- Fully temperature compensated solid state detectors
- Low power consumption in all conditions
- Higher power and more robust design telescope
- Optional Modbus RS485 multi drop output
- FM hazardous area and performance Approved
- ExdII CT6 explosion-proof grade, suitable for zone 1 and zone 2 hazardous locations
• Offshore platforms & vessels (FPSO’s)
• Downstream chemical processing plants
• Gas transport and pipelines
• Large storage areas & buildings
• Perimeter detection
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.