Geomembrane Liner Fabric Welder Welding Machine 1.0 mm HDPE LDPE, LLDPE Mining Tailing Pond
 
Quick Detail:
 
machine size: 340*350*360mm
weight: 14kg
frequency: 50/60Hz
voltage: 110V-220V
power: 800w
welding speed: 0.5-8 m/min
 
Product Description:

geomembrane welding machine is high quality automatic hot air welding machine, it is of new design and technology, which can weld geomembrane of various thicknesses and are applicable for welding material such as PE, LDPE, HDPE, EVA, PP and the like. JIT-800 is allowed to be sold before strict inspection. It is extensively used in engineering projects such as expressways, tunnels, reservoirs, waterproof of construction and so on.
 

Motor drives upper and lower pressure rollers to rotate through reduction gearbox and chain. Slide carriages drive the hot wedge and insert it between the two base materials, at the same time lever presses pressure rollers and engages the two fused base materials.

Pressure adjustment: after the machine is used for a while, the pressure might be getting lower. If the pressure is lower, get through the hole on the frame that fixes the electrical wire with a screwdriver, and turn the M4 screw to right (clockwise) to heighten the pressure (shown as fig.6). Turning the screw more right makes the pressure higher (Anticlockwise is to decrease the pressure). (Note: the pressure should be appropriate. To avoid the damage of the other parts of pressure components, pls do not adjust the pressure too acutely during once time).

Technical Parameters:

Replacement of Components
 

Remove the front end cover, remove the 4-M4 screws and tapping screw, remove a half housing, release 4-M3 screws, remove the 2-M5 screws that connect heating support and slide carriage, remove hot wedge and replace with a new one, and reassemble the complete machine (shown as fig.7). Note: conform to color on wiring.

The position of the wedge should be adjusted when welding the different thickness geomembranes, especially when the thickness of geomembranes are too difference. When welding the thin one, the peak of the wedge should be adjusted as close as possible to the pressure rollers, and vice versa. The method of adjustment is shown as Fig.7. Release the 2 M5 screws, and adjust the wedge forward and backward slightly. (Note: after adjustment, the peak of the wedge should be parallel with the axle of the pressure roller. Otherwise, it leads to different welding effects. Do not jack up the axle of the pressure roller when adjust the wedge close to the roller).

Application:

Fuyun Hot Wedge Welding Machine is is used to weld various thicknesses of geomembrane and is suitable for welding hot melt materials, such as LDPE, PVC, HDPE, EVA, PP, etc. It is widely used in highways, tunnels, reservoirs, building waterproofing, and other projects.
 

 
Advantage:

 
Control System
Advanced intelligent digital control system which temperature and speed readed on LCD screen.
Pressure Adjustment System
Advanced"T"style jib design and pressure regulation structure.
Pressure Roller
Special stainless steel pressure rollers with strong pressure force.
Heating System
Advanced hot air heating system perfects the welding quality even if corrosive materials and bad working environment.
 
 
Package & Delivery:
 
The product is packed in standard cartons and waterproof box. we gurantee the product good when customer receives it. we cooperate with international famous logistic company, and we delivery the product in time according to customer's requirement.
 

 
 
Why choose us?
 

 
FAQ: