Excellent Filling And Covering 1K Acrylic Grey Primer Automotive Refinish Auto Paint

► Product Description

Colors Refinish Paint is two-component acrylic polyurethane clear coat. It features high solid content, good weather resistance and performs brilliant luster and hardness. Suitable for spray on the surface of one-component base coat.

► Surface Preparation

1, Surface Should Be Clean And Free Of Dust, Grease And Oil.

2, Old Varnish Surfaces Must Be Sanded Using Grit Sandpaper Number 1200, Before Applying The Clear Coat.

► Construction Steps

Step 1: Clean and Prepare
Prepare the area
Start by using masking tape and newspaper to cover the surrounding area to avoid over spray to the undamaged paintwork. The area you need to mask will depend on the size of the damaged area, but better to be safe than sorry. If in doubt, always mask off a much larger area as the spray paint can travel in the air and settle on undamaged paintwork.
You’ll now need to use a paint rubbing or cutting compound on and around the scratch. Use a circular motion to remove a very thin layer of the surrounding paint – a couple of centimetres either side of the scratch will do. This will help later on when you’re blending the new coats. If there’s any excess compound or mess, clean it up so the area is clear for painting.

Step 2: Apply the Colour Coat

Choosing the right colour
You’ll need to buy touch-up paint that perfectly matches your car’s paintwork — and that’s where Automotive Refinish Paint Match Pro comes in. Using our simple online colour match checker, you can quickly find the right paint for your car based on its manufacturer, colour and year. The Paint Match Pro range features over 8,000 car colours, and the simple-to-use can is perfect for DIY repair and renovations.
Apply your chosen paint
Either spray the colour coat or use a fine paint brush or cocktail stick to build up thin layers. The key is to build the paint to just below the level of the surrounding clear coat. Leave between 10 and 30 minutes between paint applications – the paint will dry at different speeds depending on the temperature.
Step 3: Apply the Clear Coat
Once you’re happy with the level of the colour coat and it has completely dried, apply the clear coat in thin layers so it sits just above the surrounding paint. Again, allow between 10 and 30 minutes between applications depending on temperature.
You might need to leave the paint to harden for a day or two before moving on to the next step.
Step 4: Flatten the Area
Finally, you need to smooth the area so it’s flat and can’t be noticed next to the original paint.
You’ll either need to use a very fine grit wet and dry sandpaper (2,500 grit, for example) or an abrasive rubbing/cutting compound depending on the size of the scratch. Just as you did in the preparation stage, work the compound in a circular motion a couple of centimetres either side of the repair. If you’re sanding it, use a coarse sandpaper at first, changing the paper for a finer grit to work up to the 2,500 grit sandpaper in stages.
Step 5: Finishing Up
Use a polish, not a polish compound, to give your car that professional quality finish. Follow the instructions on the polish. Want it to radiate shine? Give it a wax and buff for that added gleam.

► Package and Shipping

Paint:1L and 4L or Customize.

Sea shipping

For LCL shipment volume over 1.5CBM or full container, we'll suggest you shipping by sea. It is the most economical mode of transport. For LCL shipment, normally we will put all the goods standing on the pallet, besides, there will be plastic film wrapped outside the goods.

► FAQ

Q.1: Do you have color software formulas for mixing car paint?
A: Yes, we have. we can offer formulas including CD and on-line.

Q.2:Do you provide samples ? is it free or extra?
A:According to the actual situaton, we can provied free samples.

Q:3:Can you produce the paint with customer's brand?
A:We can do OEM for you with your brands.

Q:4:What kind of certificate do u have?
A:SGS, ISO9001:2008,ISO14001:2004,ISO/TS1694, MSDS, TDS etc.

Q:5:Can you offer free advertising materials to us?
A: Yes, we can offer color chart, posters, mixing ruler, T-shirts, catalogs, tin openers, etc.

Q:6:How long for your delivery time after pay deposit?
A:15-20 days depends on total quantity.

Q:7:Can you do customized colors?
A:Yes, we can, but we need the color sample from buyers. Or maybe you can send a picture for us for reference.

► Contact Us