Packaging Size 1 Litre Automotive Refinish Paint For Motor Vehicles Coating
Automotive Refinish Paint For Motor Vehicles Coating, Packaging Size 1Litre FPCP-M1273
► Product Description
Automotive refinish coating is paint used on automobiles for both protection and decoration purposes. Water-based acrylic polyurethane enamel paint is currently the most widely used paint for reasons including reducing paint’s environmental impact.
|
Item |
Datas |
|
Color |
Color |
|
Mixture rate |
2:1:0.3 |
|
Spraying coating |
2-3 layers,40-60um |
|
Interval of time(20°) |
5-10 minutes |
|
Drying time |
Surface dry 45 minutes, polished 15 hours. |
|
Available time (20°) |
2-4 hours |
|
Spraying and applying tool |
Geocentric spray gun(upper bottle) 1.2-1.5mm;3-5kg/cm² |
|
Suction spray gun(lower bottle) 1.4-1.7mm; 3-5kg/cm² |
|
|
Theory quantity of paint |
2-3 layers about 3-5㎡/L |
|
Film Thickness |
30~40 micrometer |
► Features of Automotive Refinish Coating
1. Low VOC content with low viscosity. Cures quickly and low reduction on curing.
2. Allow smooth flow out after with rheological properties. The ability to be polished and sanded in refinish applications.
3. Time reduction in clearing coat application with the help of film formation.
►Application
Car refinish paint for automotive is widely used to all kinds of cars, buses, buses and industrial aspects of large area repair or whole vehicle spraying.
► How to refinish car paint?
1, Surface Should Be Clean And Free Of Dust, Grease And Oil.
2, Old Varnish Surfaces Must Be Sanded Using Grit Sandpaper Number 1200, Before Applying The Clear Coat.
Number Of Coats & Thickness: 2-3 Coats, 40-60μm Flash Time: Allow 5-10 Minutes Between Coats
Apply Using a Spray
Gun Nozzle:
1.2-1.4mm (Gravity Spray Gun)
1.3-1.5mm (Suction Spray Gun)
-Spraying Pressure: 3-4 Bar.
-Spraying Viscosity: 13~18s(Ford Cup #4 At 20ºC)
-Number Of Coats: 3 Coats Maximum
► Package and Shipping
Automotive refinish coating has 1L,2L,3L,4L,5L package, if you want to use others size, you contact us, we would like to supply customized service.
Transport and storage
1. The product should be stored in a cool and ventilated place to prevent direct sunlight, and keep it away from fire sources.
2. When the product is being transported, it should be protected from rain and sunlight, avoid collisions, and comply with the relevant regulations of the transportation department.
International express
For sample order, we'll suggest you shipping by DHL, TNT or air shipping. They are the most fast and convenient shipping ways. To keep the goods in good condition, there will be wood frame outside the carton box.
Sea shipping
1, For LCL shipment volume over 1.5CBM or full container, we'll suggest you shipping by sea. It is the most economical mode of transport.
2, For LCL shipment, normally we will put all the goods standing on the pallet, besides, there will be plastic film wrapped outside the goods.
► FAQ
Q:What's your MOQ?
A:It can be run according to your specific business plan, and we can measure your order according to your actual situation.
Q: Can we do OEM?
A:Yes, OEM is welcome.
Q: Are you manufacturer or trading company?
A:We are professional manufacturer and we have our own Factory.
Q:Can we visit your factory?
A:Yes. You are welcome to our factory.
Q:How about your payment?
A:30% deposit in advance, 70% balance by T/T, Western Union or else before shipment.
Q:Do you provide samples?
A:Yes, we can provide you with free samples, you just need to pay for freight.
Q:How about your delivery time?
A:Usually 7days after receiving your deposit.
► Contact Us
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.