2.5ml 3ml 3.5ml Virus Sampling Tube For Fever Clinic Emergency Department

Disposable Virus Sampling Tube

Structure Composition

This product consists of a swab and a tube containing a preservation solution. Provided non-sterile. The material of the sampling tube body is PP, the material of the cap is PE, the material of the swab rod is ABS, and the material of the swab head is nylon fleece.

Sampling Tube

• The sampling tube body is transparent, the surface is smooth and flat, and the label is clear and complete.
• The pipe body has no stains, no obvious scratches, cracks, and the pipe wall thickness is uniform, no obvious bending or deformation; the cap and the pipe body are well matched, tightly screwed, and no crooked cover phenomenon

Preservation Solution

• The liquid should be odorless, tasteless, free of particles or impurities visible to the naked eye, and should not be turbid. It is normal for bubbles or bubbles to appear during transportation and use.
• The standard range of PH value is between 7.0-8.5
• The storage capacity is:1ml,1.5ml,2ml,2.5ml,3ml,3.5ml,4ml,5ml,6ml,7ml,8ml,9ml,10ml,12ml,15ml,20ml,25ml, Tolerance ±10%

Sampling Swab

Intended Use

Suitable for sample collection, storage, transportation, etc. of the nasal cavity and oropharynx

Applicable Departments

Fever Clinic, Emergency Department, Laboratory Department, Infection Control Department

Usage Method

• Clean your hands before sampling, tear off the outer packaging of the sampling swab, take the swab out, and be careful not to touch the swab head.
• According to different sampling requirements, use a swab to sample the corresponding part.
• Immediately after sampling, put the swab into the collection tube containing the preservation solution to avoid contact with other parts.
• Break off the wiper rod, discard the tail, and then tighten the tube cap to complete the sampling.
• After sampling, the virus sampling management should be properly placed, stored, and transported to the testing department for testing within 1 week.

Matters Needing Attention

• Confirm that the outer packaging of the product is intact, check the storage tube, and confirm that there is no leakage.
• This product is for one-time use and secondary use is prohibited.
• The process of collecting samples should be considered as a potential risk of infection, and the operation and handling must meet the requirements of relevant laws and regulations.
• After the product is used, it should be disposed of in accordance with the relevant regulations of medical waste.

Important

• Make sure that the top of the sampling swab does not touch any surface before sampling.
• There is a risk of choking, when the sampling swab is inserted into the mouth, care should be taken.
• After the pathogenic bacteria specimens are collected, the disposable sampling swab should be completely inserted into the preservation solution to maximize the retention of the pathogenic bacteria.
• The storage tubes and swabs after use should be disposed of in accordance with the relevant medical waste disposal methods when discarding

Company profile