EDTA Na2 EDTA K2 Blood Sample Container Deep Blue Toxicology Trace Element Tube

Disposable Vacuum Blood Collection Container Deep Blue Blood Collection Vessel Trace Element Tube

Classification and Application

Deep blue blood collection vessel trace element tube

It contains heparin sodium, EDTA Na2, EDTA K2, coagulant (plastic tube, serum) and additive without coagulant (glass tube, serum). Heparin sodium should not be used in the detection of sodium ion in blood samples, so as not to affect the detection results.
Purpose: trace element, toxicology and nutritional chemistry test

Structure Composition

The disposable vacuum blood collection container consists of a test tube, a plug, a cap, a label, additives (if any) and additives (if any).
 

Scope Of Application

Used in conjunction with disposable intravenous needles for the collection, transportation and preservation of human venous blood.
 

Storage Requirements

Store in a dry, well-ventilated and clean room with no corrosive gas and relative humidity above 80%
 

Precautions During Use

1.According to different test requirements, select the appropriate blood collection vessel. If you have any questions, please contact the staff of the laboratory at any time.
2.The sample number must be pasted on the blood collection vessel, which is consistent with the number on the inspection sheet. It should be pasted on the paper label of blood collection vessel, not on the glass to prevent falling off.
3. When taking blood, patients should be relaxed, warm environment, prevent venous contracture, tie tourniquet time should not be too long (now some scholars think that try not to use tourniquet), observe whether the blood collection is smooth, forbid to pat the arm, otherwise it may cause local blood concentration or activate the coagulation system.
4. The recommended order of blood collection is no anticoagulant tube (serum tube) → separation gel / accelerator tube → heparin / EDTA tube → coagulation vessel → blood sedimentation tube. The main reason is that the first tube often contains tissue fluid, which is easy to cause coagulation and is not suitable for hemagglutination test; Furthermore, to avoid the contamination of serum tube by anticoagulant.
5. After blood collection, the blood samples shall be rolled according to different test categories (biochemical, immune, routine, coagulation, ESR) with test sheets, and classified. All blood samples shall not be mixed together, so as to avoid confusion in operation.
6.The proportion of blood and anticoagulant must be accurate, and the blood volume should meet the requirements.
7 after blood collection, gently turn the test tube and mix 8-10 times, but do not vibrate violently. The sample should be placed vertically after blood collection.
 

Company Profile