Injection Molded Buckle Midi Fuse Holder SF36 For Littelfuse 04998 Bolt Down Automotive Fuse
Injection Molded Buckle Midi Fuse Holder SF36 For Littelfuse 04998 Bolt Down Automotive Fuse
Skills Requirements Of The Midi Fuse Holder
1. The main material is PA66+GF15%, the whole snail is combined, and the connected film is copper Alloy (tin plating on the surface)
2. The installation fuse is SF36 series fuse
3, the outer diameter of the external wire must not exceed 6mm
4, suitable for 4998 series fuse
Ratings Of The Midi Fuse Holder
| Max current | 200A |
| Max voltage | 250V |
| Flammability rating | UL 94-V-0 |
| Housing Material | PA66+GF15% |
| Connect plate | Copper alloy (tin plating on the surface) |
| Type | Heavy duty fuse holder |
Suitable Fuse Of The Midi Fuse Holder
| Part Number |
Current Rating (A) |
Test Cable Size(mm 2) | Typ. Voltage Drop (mV) |
Typ. Cold Resistance (mΩ) |
Typ. I2t (A2s) |
| 4998030.M_ | 30 | 2.5 | 100 | 2.20 | 3200 |
| 4998040.M_ | 40 | 4 | 94 | 1.56 | 4700 |
| 4998050.M_ | 50 | 6 | 86 | 1.16 | 7500 |
| 4998060.M_ | 60 | 6 | 81 | 0.94 | 6800 |
| 4998070.M_ | 70 | 10 | 76 | 0.74 | 10 900 |
| 4998080.M_ | 80 | 10 | 64 | 0.57 | 10 500 |
| 4998100.M_ | 100 | 10 | 68 | 0.44 | 18 300 |
| 4998125.M_ | 125 | 16 | 66 | 0.35 | 51 300 |
| 4998150.M_ | 150 | 25 | 72 | 0.29 | 45 100 |
| 4998175.M_ | 175 | 25 | 70 | 0.24 | 88 000 |
| 4998200.M_ | 200 | 35 | 67 | 0.20 | 111 700 |
The typical I2 t is an average value calculated from the breaking capacity tests by using the melting time before arcing occurs.
Application Of The Midi Fuse Holder
- Cars
- Trucks
- SUVs
- Offroad vehicles
- Buses
- Watercraft as approved by Littelfuse
- Power tools
3D file in step available Of The Midi Fuse Holder
Dimension Of The Midi Fuse Holder
Actual Photos Of The Midi Fuse Holder
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.