Industrial PoE Media Converter 15.4W/30W Power 100/1000M Gigabit Ethernet SFP Unmanaged
- Features one 10-/100-/1000-Mbps copper port and one SFP fiber port
- UTP port is auto-sensing with Auto MDI/MDI-X and supports 802.3af 802.3at POE
- Rugged metal case
- Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
- IEEE 802.3 10Base-T and IEEE 802.3u 1000Base-TX compliant
- Detect the PoE models of electrical devices
Specification of Rugged Fiber Ethernet Converter
| Product Name | 10/100/1000Mbps Industrial POE Fiber Media Converter (1F+1TP) |
| Port |
1 x 100/1000Mpbs fiber port SM: 1310nm/1550nm,20Km; 1490nm/1550nm, 40~120Km MM: 1310nm, 2Km; 850nm, 500m 8x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Switching features |
Transmission mode: storage and forward System bandwidth: 4Gbps (non-traffic jam) Forwarding rate: 5.952Mpps MAC: 2K Packet buffer size: 1.75Mb |
| Network media |
10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) Fiber port transmission distance: 20Km, 40Km, 60Km, 80Km, 100Km |
| LEDs |
Power, network, fiber PWR: power Fiber: FX1
Copper orange: PoE indicator On: PoE is working Off: PoE is not working
Copper green: Link/Act indicator On: transmission is normal Off: transmission is NOT normal |
| Power supply |
POE power supply input voltage: 48V (max 52V), Single PoE power supply output power: 15.4W/30W (port 1) Single PoE output voltage: DC48V, Active PoE |
| Environment |
Working temperature: -40°～ 75°C Storage temperature: -40°～ 85°C Working humidity: 10%～90%, non-condensing Storage humidity: 10%～95%, non-condensing |
| Safety |
ESD:IEC61000-4-2,±15KV air, ±6KV contact EFT:IEC61000-4-4, General ±6KV Surge: IEC61000-4-5,Differential ±2KV, Common±6KV
CE-EMC: EN 55032:2015+AC:2016+A1:2020+A11:2020 EN 55035:2017+A11:2020/EN IEC 61000-3-2:2019/A1:2021 EN 61000-3-3:2013/A2:2021/AC:2022 CE-LVD: EN IEC 62368-1:2020+A11:2020 |
| Mechanical information |
Shell: Corrugated metal shell Safety class: IP40 Dimension: 113.8 x 93 x 34.9mm Mounting method: Din-rail mounting |
| Warranty | Replacement within 1 year; 3 years repairing |
Fiber Options
On the fiber side there are 2 main options for you
SFP Optical Port
- It extends a network cable connection 500-meter or 2KM on Multimode optic cable
- On singlemode fiber, it is flexible to extend 10Km/20KM/40KM/60KM distance
1*9 Fixed Fiber Module
- You could choose FC/ST/SC fiber transceiver for difference distances.
- The standard packing usually contains a main device, a warranty card and a user manual.
- Packing box dimension for 1pc: 25.3*20.8*8cm
- Packing: 20pcs in a packing box of 67*33*47cm dimension
Application of PoE media converter
QC Profile
ISO9001 Quality System
We got necessary certificates to support our products.
Full-Spectrum environment and electrical testing of all product design
- Welding: Weld the necessary components
- 2. Cleaning: To avoid any possible dysfunction due to dust or scraps on the PCB boards.
- 3. Assembling: Builds up components of a product, like panels, screws, PCB boards.
- 4. Testing: To make sure the product is basically working fine after assembling
- 5. Aging: To check if the product can work smoothly for long time without any minors such as LED indicators, voltage. This will usually last for 24 to 48 hours.
- 6 Testing: To test if the product can process data or video signals correctly. Any data loss? Transmission rate correct? Any data packet failure? Such questions would be verified in this procedure.
- 7. QC testing: This is the third and also last check of product quality. If it goes good, our packing staff will pack it up according to customer requirements and attach to the packing box a product label.
- When all above is done, the product will go to market.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.