8 Port Lite L3 Managed Switch Industrial Grade 2.5G Fiber POE/POE+ Gigabit Based 240W
- IM-FP288GW series is the 10/100/1000 Mbps managed industrial POE fiber switch,
- comply with IEEE802.3af/at, power on POE IP cameras through the Ethernet cable
- simple construction, power range up to 100 meters
- operating temperature -40 ℃ to + 75 ℃
- meet IP40 protection degree and EMC industrial grade requirements
- DIN rail or wall installationIEEE 802.3af/at power on to 1 ~ 8 RJ45 ports
- 8 x 10/100/1000Mbps Auto-sensing RJ45 ports
- 2 x 1000Mbps SFP fiber port
- 6KV Ethernet surge protection, adapt to a harsh outdoor environment
- Support Auto MDI/MDIX
| Port |
2 x 100M/1G/2.5G SFP port SM:1310nm/1550nm,20Km ;1490nm/1550nm, 40~120Km MM: 1310nm, 2Km; 850nm, 500m 8x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Standard | IEEE 802.3, IEEE802.3U, IEEE802.3ab, IEEE802.3z, IEEE802.1d STP IEEE802.1w RSTP, IEEE802.1s MSTP, ITU-T G.8023 EPR/Y.1344 IEEE802.1Q, IEEE802.1X, IEEE802.3ad, IEEE802.3x, IEEE802.3af IEEE802.3at, IEEE802.1ad, IEEE802.1p, IEEE802.1ab, IEEE802.3az |
| VLAND ID | 4096 |
| Jumbo Frame | 9.6KB |
| MAC Address Table Size | 8K |
| Switching features |
Transmission mode: storage and forward Forwarding delay: <10us System bandwidth: 26Gbps(non-traffic jam) DRAM size: 128M Flash size: 16M |
| Network media |
10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) SFP port, transmission distance: 20Km,40Km,60Km,80Km,100Km |
| LEDs |
Power, network, fiber PWR: Power FX: Fiber port(1) Orange: Link/ACT Green: 1000M Network Speed(off when it is 100Mb/s) |
| Power supply |
POE power supply input voltage: 48V (max 52V) Single PoE power supply output power: 30W (port 1~8) PoE output voltage: 48V |
| Environment |
Working temperature: -40～75°C Storage temperature: -40～85°C Working humidity: 10%～90%, non-condensing Storage humidity: 10%～95%, non-condensing |
| Industry Standards |
EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A EMS: EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN 61000-4-8 Traffic Control: NEMA-TS2 Vibration: IEC 60068-2-6 Freefall: IEC 60068-2-32 Shock: IEC 60068-2-27 Rail Traffic: EN 50121-4 |
| Safety | CE Mark, commercial
CE/LVD EN60950 |
| Mechanical information |
Shell: Corrugated metal shell Safety class: IP40 Dimension: 158 x 115x 60mm Mounting method: Din-rail/Wall mounting |
| Warranty | Replacement within 1 year; 3 years repairing |
- Support cable diagnosis and can locate the fault point
- Support IEEE802.3az EEE (Energy Efficient Ethernet) Management, optimize power consumption
- Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
- Support Qos, transport classification Qos, Cos, bandwidth control(input/output direction), storm suppression ,differentiated services
- Support IEEE802.1q VLAN,VLAN port ,based Mac VLAN,IP subnet VLAN, Protocol VLAN,VLAN convert, MVR
- Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP
- Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP,TFTP, QoS, ACL
QC Framework (Industrial Ethernet Switches)
1.Standards
1.Comply with ISO9001, CE, RoHS, UL, IEEE 802.3, IEC 61000
2.Meet customer-specific performance metrics for industrial automation, SCADA systems, and real-time communications
2.QC Process
1.Incoming Inspection: Verification of components (PCBs, Ethernet ports, power supplies) against specifications
2.Production Control: Automated Optical Inspection (AOI) for solder joints, PCB component placement, and port alignment
3.Functional Testing: Throughput verification, VLAN configuration, Layer 2/3 switching, PoE functionality testing
4.Reliability Testing: High temperature (-40~75°C), humidity, shock, and vibration tests to simulate industrial environments
5.Final Inspection: Aesthetic check (housing, labeling) and full functional re-test after burn-in
3.Test Equipment
1.Traffic Generator (to simulate network load)
2.Protocol Analyzer (for layer 2/3 functionalities)
3.Environmental Test Chambers (to simulate real-world conditions)
4.System
1.Full traceability with test records for each unit, including compliance certifications and component lot tracking
5.Continuous Improvement
1.Root cause analysis for field failures (e.g., component degradation, overheating)
2.Customer feedback loop to refine product robustness
3.Ongoing process improvement based on feedback from production and deployment environments
Warranty
1 year for commercial products and 3 years for industrial products. Technical support will be offered free.
| Products Category | Warranty Period |
| Fiber media converter | 1 year |
| Optical Video Converter | 1 year |
| Fiber Switch | 1 year |
| Ethernet Extender | 1 year |
| Fiber Modem | 1 year |
| PDH Multiplexer | 1 year |
| Industrial switch | 3 years |
Packing Box
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.