Industrial 5-Port Ethernet Switch E-Mark Certified Unmanaged 12V/24V Input Fanless
Full Gigabit E-mark Industrial Ethernet 5-port Switch
Key Features of E-mark Ethernet Switch
- 5 x 10/100/1000Mbps Auto-sensing RJ45 ports
- 6KV Ethernet surge protection, adapt to a harsh outdoor environment Support Auto MDI/MDIX
- Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
- IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant A store-and-forward switching mechanism
- Operating environment temperature: -40°c~75°c
Specification of Industrial E Mark Ethernet Switch
| Product Name | 10/100/1000Mbps Industrial Ethernet Switch(5TP) |
| Model No. | IM-WS050GE |
| Port | 5 x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Switching features |
Transmission mode: storage and forward System bandwidth:10Gbps (non-traffic jam) |
| Network media |
10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) |
| LEDs | Power, network |
| Power supply |
Input voltage: DC 12-52V No-load power: 5W Reverse connection: support |
| Environment |
Working temperature:-40°～ 75°C Storage temperature:-40°～ 85°C Working humidity:10%～90%,non-condensing Storage humidity:10%～95%,non-condensing |
| Industry Standards |
EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A EMS: EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN 61000-4-8 Traffic Control:NEMA-TS2 Vibration:IEC 60068-2-6 Freefall:IEC 60068-2-32 Shock: IEC 60068-2-27 Rail Traffic:EN 50121-4 |
| Safety |
CE Mark, commercial, E-mark CE/LVD EN60950 |
| Mechanical information |
Shell: Corrugated metal shell Safety class: IP40 Dimension:114 x 93 x 35mm Mounting method: Din-rail mounting |
| Warranty | Replacement within 1 year; 3 years repairing |
Application of E-Mark Ethernet Switch
Dimension of 5-port Gigabit switch
Packing box of Din rail unmanaged switch
-
Put the product in an ESD Bag, then placed in PE foams with outer carton packaging.
- The standard packing usually contains a main device, a warranty card and a user manual.
- Packing box dimension for 1pc: 23*16.5*5.8cm
- 40pcs in a packing box of 67*33*47cm dimension.
Production steps
- Welding: Weld the necessary components
- Cleaning: To avoid any possible dysfunction due to dust or scraps on the PCB boards.
- Assembling: Builds up components of a product, like panels, screws, PCB boards.
- Testing: To make sure the product is basically working fine after assembling
- Aging: To check if the product can work smoothly for long time without any minors such as LED indicators, voltage. This will usually last for 24 to 48 hours.
- Testing: To test if the product can process data or video signals correctly. Any data loss? Transmission rate correct? Any data packet failure? Such questions would be verified in this procedure.
- QC testing: This is the third and also last check of product quality. If it goes good, our packing staff will pack it up according to customer requirements and attach to the packing box a product label.
- When all above is done, the product will go to market.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.