6 Port Gigabit Managed Hardened Network Switch Compact Size Dual Power DC12V
Compact Gigabit Fully Managed Industrial Network Switch
Introduction to industrial ethernet switch
- IM-FS240GM series is the 10/100/1000 Mbps industrial fiber switch
- operating temperature -40 ℃ to + 75 ℃
- support wide voltage dual power input, support web management
- meet IP40 protection degree and EMC industrial grade requirements
- DIN rail installation, pass through dangerous environmental certification and comply with FCC and CE standards
Specification of 6 port hardened switch
| Product Name | 10/100/1000Mbps Managed Industrial Fiber Switch (2F+4TP) |
| Model No. | IM-FS240GM |
| Port |
2 x 1000Mpbs SFP port SM: 1310nm/1550nm,20Km ;1490nm/1550nm, 40~120Km MM: 1310nm, 2Km; 850nm, 500-meter 4x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Standard | IEEE 802.3i, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE 802.3x , IEEE 802.1Q VLAN Tagging, IEEE 802.1p CoS, IEEE 802.1X, IEEE 802.3ad, ITU-T G.8032 ERPS |
| Protocol | IGMPv1/v2, GVRP, SNMPv1/v2c/v3, DHCP Client TFTP, SMTP, RMON, HTTP, HTTPS, Telnet, Syslog, GVRP SSH, SNMP Inform, LLDP, SNTP Server/Client,PVLAN |
| MIB | MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9 |
| Switching Features |
Priority queue: 4 Number of VLANs: 256 VLAN ID: 1～4094 Number of multicast groups: 256 MAC table: 4K Packet buffer: 1Mbit Packet forwarding rate: 14.88Mpps Exchange delay: <5μs |
| Alarm Output | One relay alarm output: support IP/MAC conflict, power supply, port and ring alarm |
| Power supply |
Input voltage: DC 12-52V No-load power: 5W Reverse connection: support Overload protection: support Redundant protection: support |
| Environment |
Working Temp: -40°～ 75°C Storage Temp: -40°～ 85°C; Working humidity: 5%～95%, non-condensing |
| Industry Standards |
EMI: FCC CFR47 Part 15,EN55022/CISPR22,Class A EMS: IEC61000-4-2(ESD) ±8kV(contact),± 15kV(air) IEC61000-4-3(RS) 10V/m(80MHz～2GHz) IEC61000-4-6(CS) 3V(10kHz～150kHz);10V(150kHz～80MHz) IEC61000-4-16 30V(cont.),300V(1s) IEC60068-2-6, IEC60068-2-27, IEC60068-2-32 IEC61000-6-2 EN50155,EN50121-4 NEMA TS-2 |
| Mechanical information |
Shell: Corrugated metal shell; Safety class: IP40 Dimension: 113.8 x 93 x 34.9mm Mounting method: Din-rail mounting |
| Warranty | Replacement within 1 year; 3 years repairing |
Management Features of 6 port managed switch
- Support ITU-T G.8032 Ethernet Protection Ring(EPR)
- Supports CLI for quick and easy configuration of key management functions
- DHCP Option 82 is used to assign IP addresses with different strategies
- Support ERPS standard ring network protocol
- IGMP Snooping and GMRP filter multicast traffic
- Support port-based VLAN, IEEE 802.1Q VLAN and GVRP protocol, easy network planning
- Support port mirroring
- Supports Ethernet/IP for device management and control
- Support multicast, broadcast storm control
- Bandwidth management: support port aggregation, port speed limit, broadcast storm suppression
- Support QoS and ToS/DiffServ for traffic control and management
- Support link aggregation to optimize bandwidth utilization
- Support SNMPv3, IEEE 802.1X, HTTPS and SSH to enhance network security
- Support TACACS+
- Using RMON to Effectively Improve Network Monitoring and Prediction Capabilities
- Support port locking based on MAC address to prevent illegal intrusion
- Realize automatic alarm through E-mail and relay output
- Reset: Support restart and restore default configuration
Application of mini managed switch
Accessories
| Industrial SFP Transceiver | |
| OSPL1E06D-85 | 100BASE-FX (850nm) |
| OSPL1E06D | 100BASE-FX |
| OSPL1E20D | 100BASE-LX |
| OSPL1E40D | 100BASE-EX |
| OSBL1E20D-35 | 100BASE-BX-U (TX 1310 RX1550) |
| OSBL1E20D-53 | 100BASE-BX-D (TX 1550 RX1310) |
| OSPL1G05D | 1000BASE-SX |
| OSPL1G06D | 1000BASE-SX (1310nm) |
| OSPL1G20D | 1000BASE-LX |
| OSPL1G40D | 1000BASE-EX |
| OSBL1G20D-35 | 1000BASE-BX-U (TX 1310 RX1550) |
| OSBL1G20D-53 | 1000BASE-BX-D (TX 1550 RX1310) |
| Industrial Power Adapter Din-rail | |
| IM-DAC220/DC48V2.5A | AC220V to DC48V2.5A, -40～80℃ |
| IM-DAC220/DC48V5A | AC220V to DC48V5A, -40～80℃ |
| IM-DAC220/DC48V10A | AC220V to DC48V10A, -40～80℃ |
FAQ
1 Q: What is your lead time?
A:It usually takes 2~4 working days to produce and then will send goods.
2 Q: How will you send my goods?
A: We will send the goods by DHL, TNT, UPS or FEDEX, please check the delivery details by the tracking number.
3 Q: What is warranty time?
A: A year for commercial products and 3 years for industrial products.
Technical support will be offered free.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.