8 Port PoE Managed Switch 802.3bt 90W Gigabit Network SFP/Copper Uplink 480W Budget
Gigabit 8-Port 802.3bt Layer 2 Managed Switch
Basic Information of 8 port PoE switch
- Port: 2*100/1000/2500M SFP fiber ports+1*Console port+2 Combo ports+8*100/1000M Copper
- PoE Standard: IEEE 802.3af/at/bt (15.4W/30W/60W/90W) on 1 ~ 8 RJ45 ports, 720W budget
- Management Feature: Vitesse-based, QoS/STP/ERPS/MPLS/VLAN...
- POE distance: 100-meter, support external POE accessory(POE extender/splitter)
- Operating temperature -40℃ to + 75℃(fully tested)
- IP40 protection level
- DIN rail design, fan-less heat dissipation
- CE/FCC compliant
- 6KV Ethernet surge protection, 1500V Port-to-port isolation voltage
- Support Auto MDI/MDIX
- Flow control mode: full duplex with IEEE 802.3x standard half-duplex with Back pressure standard
- IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
- A store-and-forward switching mechanism
Key Features of POE managed Switch
- Real-time display of voltage, current, power and PD level and full indicators
- Enable/disable the POE ports, set the POE power-on delay and POE output power
- Support relay alarm output and alarm status light display(2 way-from dry contact)
Specification of industrial POE switch
| Product Name | 10/100/1000Mbps Managed Industrial POE Fiber Switch(1F+9TP) |
| Model No. | IM-FP1188GW |
| Port |
1x 1000Mpbs SFP port, 1G/2.5G both supportive SM: 1310nm/1550nm,20Km; 1490nm/1550nm, 40~120Km MM: 1310nm, 2Km; 850nm, 500 meters 8x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Standard |
IEEE 802.3, IEEE802.3U, IEEE802.3ab, IEEE802.3z, IEEE802.1d STP IEEE802.1w RSTP, IEEE802.1s MSTP, ITU-T G.8023 EPR/Y.1344 IEEE802.1Q, IEEE802.1X, IEEE802.3ad, IEEE802.3x, IEEE802.3af IEEE802.3at, IEEE802.1ad, IEEE802.1p, IEEE802.1ab, IEEE802.3az |
| VLAND ID | 4096 |
| Jumbo Frame | 9.6KB |
| MAC Address | 8K |
| Switching features |
Transmission mode: storage and forward Forwarding delay: <10us System bandwidth: 58Gbps(non-traffic jam) DRAM size: 128M Flash size: 16M |
| Network media |
10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) SFP port transmission distance: 20Km, 40Km, 60Km, 80Km, 100Km |
| LEDs | Power, network, fiber, POE, alarm |
| Power supply |
POE power supply input voltage: 48V (max 57V) Single PoE power supply output power: 15.4W/30W/60W/90W(port 1~8) |
| Environment |
Working Temp: -40°～75°C Storage Temp: -40°～ 85°C Working humidity: 10%～90%, non-condensing Storage humidity: 10%～95%, non-condensing |
| Industry Standards |
EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A EMS: EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3 EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3 EN 61000-4-6 (CS) Level 3, EN 61000-4-8 Traffic Control: NEMA-TS2 Vibration: IEC 60068-2-6 Freefall: IEC 60068-2-32 Shock: IEC 60068-2-27 Rail Traffic: EN 50121-4 |
| Safety | CE Mark, commercial; CE/LVD EN60950 |
| Mechanical information |
Shell: Corrugated metal shell Dimension: 165 x 112 x 45.5mm Mounting method: Din-rail mounting |
| Warranty | Replacement within 1 year; 3 years repairing |
Application of BT standard PoE switch
- Supply power to power-hungry devices
- Optical Telecommunication
- Remote controlling and monitoring
- Outdoor CCTV security surveillance
- Broadband private network
Management Features
- Support cable diagnosis and can locate the fault point
- Support IEEE802.3az EEE (Energy Efficient Ethernet) Management, optimize power consumption
- Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
- Support Qos, transport classification Qos, Cos, bandwidth control (input/output direction), storm suppression ,differentiated services
- Support IEEE802.1q VLAN,VLAN port ,based Mac VLAN,IP subnet VLAN, Protocol VLAN,VLAN convert, MVR
- Support dynamic IEEE802.3ad LACP link aggregation, static link aggregation
- Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating, IGMP searching
- Support IGMP agent report, MLD snooping
- Safety: based on port and Mac IEEE802.1X, RADIUS, ACL, TACACS+, HTTP/HTTPS, SSL/SSH v2
- Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
- Support software upgrade via TFTP and HTTP, firmware redundancy prevents upgrade failing
- Support DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
- Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP
- Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP,TFTP, QoS, ACL.
FAQ
- Alarm ports
It is I/O ports, there is no serial communication.
Clink all in the management interface
Connect those 2 alarm ports to an external bell or siren
The bell/siren rings to warm the users if any port is down(remote real-time monitoring)
- Management
Support Console/ SNMP/CLI(SSH/Lan port/Telnet...) and IP address management
Programmable POE&Power Supply
It continuously supplies 15.4W/30W/60W/90W standard power to PD devices from 8 POE ports(excluding combo ports)
We do not suggest connecting too many power-hungry devices to a single switch, this will affect the stability
Full-load, 720W POE output, 15A/48V power supply is required
Programmable POE output budget such as 480W/240W to match your in-hand power supply
It is recommended to set 480W for better stability and service life.
- Simple Customization
Support
It is basically about
Putting customer logo in the management interface
Putting customer model name in the management interface
Putting customer brand color in the management interface
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.