1.25G SFP Transceiver Module Single Mode 20km 1310nm 1550nm DDM Compatible With Cisco
1.25G Transceiver SFP Module single mode
20km 1310nm 1550nm DDM compatible with Cisco
- Supports up to 1.25Gbps bit rates
- Hot-pluggable SFP footprint
- 1310nm FP laser and PIN photo detector, Up to 20km for SMF transmission
- Compliant with SFP MSA and SFF-8472 with single LC receptacle
- Compatible with RoHS
- Single +3.3V power supply
- Real Time Digital Diagnostic Monitoring
- Operating case temperature:
- Standard: 0 to +70°C
- Industrial: -40 to +85°C
Introduction of 1.25G SFP Module
The SFP transceivers are high performance, cost effective modules supporting data rate of 1.25Gbps and 20km transmission distance with SMF.
The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics functions.
Absolute Maximum Ratings
| Parameter | Symbol | Min | Max | Unit |
|
Supply Voltage |
Vcc | -0.5 | 4.5 | V |
| Storage Temperature | Ts | -40 | +85 | °C |
| Operating Humidity | - | 5 | 85 | % |
Recommended Operating Conditions
| Parameter | Symbol | Min | Typical | Max | Unit | |
| Operating Case Temperature | Standard | Tc | 0 | +70 | °C | |
| Extended | -20 | +80 | °C | |||
| Industrial | -40 | +85 | °C | |||
| Power Supply Voltage | Vcc | 3.135 | 3.30 | 3.465 | V | |
| Power Supply Current | Icc | 300 | mA | |||
| Data Rate | 0.1 | 1.25 | Gbps | |||
Optical and Electrical Characteristics
| Parameter | Symbol | Min | Typical | Max | Unit | Notes | ||
| Transmitter | ||||||||
| Centre Wavelength | λc | 1260 | 1310 | 1360 | nm | |||
| Spectral Width(RMS) | Δλ | 3 | nm | |||||
| Side-Mode Suppression Ratio | SMSR | - | - | - | dB | |||
| Average Output Power | Pout | -9 | 0 | dBm | 1 | |||
| Extinction Ratio | ER | 9.0 | dB | |||||
| Data Input Swing Differential | VIN | 180 | 1200 | mV | 2 | |||
| Input Differential Impedance | ZIN | 90 | 100 | 110 | Ω | |||
| TX Disable | Disable | 2.0 | Vcc | V | ||||
| Enable | 0 | 0.8 | V | |||||
| TX Fault | Fault | 2.0 | Vcc | V | ||||
| Normal | 0 | 0.8 | V | |||||
| Receiver | ||||||||
| Centre Wavelength | λc | 1530 | 1550 | 1570 | nm | |||
| Receiver Sensitivity | -23 | dBm | 3 | |||||
| Receiver Overload | -1 | dBm | 3 | |||||
| LOS De-Assert | LOSD | -24 | dBm | |||||
| LOS Assert | LOSA | -38 | dBm | |||||
| LOS Hysteresis | 0.5 | 4 | dB | |||||
| Data Output Swing Differential | Vout | 600 | 800 | 1000 | mV | 4 | ||
| LOS | High | 2.0 | Vcc | V | ||||
| Low | 0.8 | V | ||||||
Ordering information
| Part Number | Product Description |
| OSBL1G20D-35 | 1310T/1550R, 1.25Gbps, LC, 20km, 0°C~+70°C, with DDM |
| OSBL1G20DI-35 | 1310T/1550R, 1.25Gbps, LC, 20km, -40°C~+85°C, with DDM |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.