5-Port E-Mark Gigabit Network Switch Rugged Ethernet Unmanaged 6KV Surge Protection
Full Gigabit E-mark Industrial Ethernet Switch 5-port
Key Features of E-mark Network Switch
- 5x 10/100/1000Mbps Auto-sensing RJ45 ports
- 6KV Ethernet surge protection, adapt to a harsh outdoor environment
- Support Auto MDI/MDIX
- Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
- IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
- A store-and-forward switching mechanism
- DIN rail or Wall installation
- Comply with FCC and CE standards
- Operating environment temperature: -40°C～75°C
Specification of E-mark Switch Unmanaged
| Product Name | 10/100/1000Mbps Industrial Network Switch (5TP) |
| Model No. | IM-WS050GE |
| Port |
5*10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Switching features |
Transmission mode: storage and forward System bandwidth: 10Gbps (non-traffic jam) Forwarding rate: 14.88Mmps MAC: 4K Packet buffer size: 1.75Mb |
| Network media |
10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) |
| LEDs | Power, Network
PWR: Power
Copper orange: PoE indicator On:PoE is working Off:PoE is not working or this is Non-PoE device
Copper green: Link/Act indicator On:transmission is normal Blinking: in transmission Off:transmission is NOT normal |
| Power supply |
Input voltage: DC12-52V No-load power: 5W Reverse connection: support |
| Environment |
Working temperature:-40°～ 75°C Storage temperature:-40°～ 85°C Working humidity:10%～90%,non-condensing Storage humidity:10%～95%,non-condensing |
| Industry Standards |
ESD: IEC61000-4-2, ±15KV air, ±6KV contact EFT: IEC61000-4-4, General ±6KV Surge: IEC61000-4-5, Differential ±2KV, Common±6KV |
| Safety |
CE-EMC: EN 55032:2015+AC: 2016+A1:2020+A11: 2020 EN 55035:2017+A11: 2020/EN IEC 61000-3-2:2019/A1: 2021 EN 61000-3-3: 2013/A2: 2021/AC:2022 CE-LVD: EN IEC 62368-1: 2020+A11:2020 FCC: 47 CFR FCC Part 15 Subpart B(Class B) ANSI C63.4: 2014 |
| Mechanical information |
Shell: Corrugated metal shell, IP40 grade level Dimension: 114*93*35mm Mounting method: Din-rail/Wall mounting Weight: 0.35Kg/0.45Kg(Net/Gross) |
| Warranty | 3 years, lifetime technical support |
Application of 5 Port LAN Switch
- Introducing our IM-FS050GE series - the ultimate 10/100/1000 Mbps industrial network switch.
- Boasting a simple yet robust construction, it can handle power range up to 100 meters and can operate flawlessly in extreme temperature from -40 ℃ to + 75 ℃.
- With its IP40 protection degree and EMC industrial grade requirements, it's the perfect choice for industrial applications that require reliable network connectivity.
- Plus, it's easy to install with DIN rail installation, and it has passed dangerous environmental certification, and complies with FCC and CE standards, making it a top choice for your automation system.
- Trust in our industrial-grade design for continuous and stable network operation, even in the toughest of environments.
Dimension of Hardened Ethernet Switch
Packing Box
Production Steps
- Welding: Weld the necessary components
- Cleaning: To avoid any possible dysfunction due to dust or scraps on the PCB boards.
- Assembling: Builds up components of a product, like panels, screws, PCB boards.
- Testing: To make sure the product is basically working fine after assembling
- Aging: To check if the product can work smoothly for long time without any minors such as LED indicators, voltage. This will usually last for 24 to 48 hours.
- Testing: To test if the product can process data or video signals correctly. Any data loss? Transmission rate correct? Any data packet failure? Such questions would be verified in this procedure.
- QC testing: This is the third and also last check of product quality. If it goes good, our packing staff will pack it up according to customer requirements and attach to the packing box a product label.
When all above is done, the product will go to market.
E-mark Compliance
FAQ
1, What chip is it based?
Olycom: Realtek
2, Can I customize it?
Olycom: Yes. We support OEM services like logo, model name, label, PVC mask and product parts(mounting kit, power terminal block etc.)
3, Can I connect it with 10/100M devices?
Olycom: Yes. All ports are 10/100/1000M auto-sensing
4, Does it have PoE or management function?
Olycom: No. Its just simple plug-and-play.
But we have PoE model(IM-WP054GE) or Managed model(IM-WP054GW).
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.