8 Port Ruggedized Optical Bypass Managed Switch Gigabit Ethernet with PoE 240W Budget CE
2.5G Managed PoE Fiber Bypass Switch 8 Port
|
Product Name |
10/100/1000Mbps Managed Industrial PoE Fiber Bypass Switch(2F+8TP) |
|
Model No. |
IM-FBP288GW |
|
Port |
2*100/1000/2500Mpbs SFP ports 2* LC bypass ports(SM/MM) SM: 1310nm/1550nm, 20Km; 1490nm/1550nm, 40~120Km MM: 1310nm, 2Km; 850nm, 500-meter 8*10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
|
Protocol |
IEEE 802.3 IEEE802.3U IEEE802.3ab IEEE802.3z IEEE802.1d STP IEEE802.1w RSTP IEEE802.1s MSTP ITU-T G.8023 EPR/Y.1344 IEEE802.1Q IEEE802.1X IEEE802.3ad IEEE802.3x IEEE802.1ad IEEE802.1p IEEE802.1ab IEEE802.3az IEEE802.3af IEEE802.3at |
|
Switching Features |
Transmission mode: storage and forward Forwarding delay: <10us System bandwidth: 26Gbps(non-traffic jam) Forwarding rate: 19.344Mpps DRAM size: 128M Flash size: 16M VLAND ID: 4096 MAC Address Table Size: 8K Jumbo Frame: 9.6KB |
|
Network Media |
10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) |
|
LEDs |
Power, network, fiber PWR: Power
Orange: Link/ACT Green: 1000M Network Speed(off when it is 100Mb/s)
Fiber: FX1/FX2 |
|
Power Supply |
Input voltage: 48V(max 52V) PoE output voltage: 48V Single PoE output power: 30W(port 1~8) Max budget: 240W Reverse connection: support |
|
PoE Wiring |
PoE af/at: 1/2(V+), 3/6(V-) |
|
Environment |
Working temperature: -40°C～75°C Storage temperature: -40°C～85°C Working humidity: 10%～90%, non-condensing Storage humidity: 10%～95%, non-condensing |
|
Industry Standards |
ESD: IEC61000-4-2, ±15KV air, ±6KV contact EFT: IEC61000-4-4, General ±6KV Surge: IEC61000-4-5, Differential ±2KV, Common±6KV |
|
Certification |
CE-EMC: EN 55032:2015+AC: 2016+A1:2020+A11: 2020 EN 55035:2017+A11: 2020/EN IEC 61000-3-2:2019/A1: 2021 EN 61000-3-3: 2013/A2: 2021/AC:2022 CE-LVD: EN IEC 62368-1: 2020+A11:2020 FCC: 47 CFR FCC Part 15 Subpart B(Class B) ANSI C63.4: 2014 |
|
Mechanical information |
Shell: Corrugated metal shell, IP40 grade level Dimension: 158*115*60mm Mounting method: Din-rail/Wall mounting Weight: 0.75Kg/0.9Kg(Net/Gross) |
|
Warranty |
3 years, lifetime technical support |
|
Fiber Bypass |
|||
|
Category |
Unit |
Specification |
|
|
Wavelength range |
nm |
850±40/1300±40 |
1260~1650 |
|
Test wavelength |
nm |
850/1300 |
1310/1550 |
|
Insert loss |
dB |
Typ: 0.6 Max: 1.0 |
Typ: 0.6 Max: 1.0 |
|
Return loss |
dB |
MM≥30 SM≥50 |
|
|
Channel crosstalk |
dB |
MM≥35 SM≥55 |
|
|
Polarization loss |
dB |
≤0.05 |
|
|
Wavelength loss |
dB |
≤0.05 |
|
|
Temperature loss |
dB |
≤0.05 |
|
|
Repeat-ability |
dB |
≤0.05 |
|
|
Operating voltage |
v |
3.3V-5V |
|
|
Service life |
times |
≥100000000 |
|
|
Switching time |
ms |
≤10 |
|
|
Transmission optical power |
mw |
≤500 |
|
|
Operating temperature |
ºc |
-20~+70 |
|
|
Storage temperature |
ºc |
-40~+85 |
|
As an indispensable part of optical communication&protection system, the fiber bypass is highly reliable and stable for different optical path needs such as
-
Metropolitan area network (MAN)
-
Dynamic configuration of add/drop multiplexing
-
System monitoring
-
Laboratory research and development
Meantime, the fiber pass switch characterizes
-
Low Insertion Loss
-
Wide Wavelength Range
-
Low Channel Crosstalk
3. WEB Info
- Support cable diagnosis and can locate the fault point
- Support IEEE802.3az EEE(Energy Efficient Ethernet) Management, optimize power consumption
- Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
- Support QoS, transport classification QoS, CoS, bandwidth control(input/output direction), storm suppression, differentiated services
- Support IEEE802.1q VLAN, VLAN port, based Mac VLAN, IP subnet VLAN, Protocol VLAN, VLAN convert, MVR
- Support dynamic IEEE802.3ad LACP link aggregation, static link aggregation
- Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating, IGMP searching
- Support IGMP agent report, MLD snooping
- Safety: based on port and Mac IEEE802.1X, RADIUS, ACL, TACACS+, HTTP/HTTPS, SSL/SSH v2
- Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
- Support software upgrade via TFTP and HTTP, firmware redundancy prevents upgrade failing
- Support DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
- Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP
- Support IPV6 Telnet server/ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP, TFTP, QoS, ACL
4. Application
- Metropolitan Area Networks (MAN) – Ensures uninterrupted fiber transmission when inline devices fail or require maintenance.
- CCTV & Security Surveillance Systems – Powers IP cameras via PoE while protecting fiber links in outdoor and roadside deployments.
- Industrial Automation & Monitoring – Maintains continuous communication in factories, substations, and industrial control networks.
- Optical Network Monitoring Systems – Ideal for inserting monitoring, analysis, or protection equipment without risking traffic interruption.
- Laboratory & R&D Environments – Provides stable, repeatable fiber switching for optical testing and system validation.
- Transportation & Smart City Infrastructure – Supports traffic monitoring, railway communication, and city-wide surveillance networks.
5. Packing List
-
1pc switch
-
1pc user manual
-
1pc console cable
Remark
Accessories(DIN rail bracket, optical module, power supply, patchcord, network cable etc.)are NOT included in the packing box, please prepare it by yourself or purchase a whole set from us
Shipping box information
Product size: 15.8*11.5*6cm
Inner box size: 25.3*20.8*8cm
Product weight: 0.75Kg
Packing weight: 0.9Kg
Master box size: 55.5*40*41cm
Packing quantity: 20Pcs
Packing weight: 20Kg
6. FAQ
1, What chip is it based?
Olycom: Vitesse
2, Can I customize it?
Olycom: Yes
We support OEM services like logo, model name, label, PVC mask and product parts(mounting kit, power terminal block etc.)
3, Can I connect it with 10/100M devices?
Olycom: Yes
For LAN ports, they are 10/100/1000M auto-sensing
For Fiber ports, please configure 100Mbps speed via Web GUI or CLI
4, Can I shut down PoE function for some ports when necessary?
A: Yes
All the PoE managed switches in this series support PoE management
Please just set PoE status via Web GUI or CLI
5, Do you do SKD/CKD?
A: Yes
As a factory, we have dealt with this many times.
7. Photos
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.