Outdoor PoE Managed Switch Gigabit Ethernet Network 2.5G Fiber Dual 48V Input

Price Negotiable

Price: Negotiable

MOQ: 1pc

Delivery Time: 3-5 working days

Brand: OLYCOM

Product Description

Outdoor PoE Managed Switch 5 Port

Introduction to PoE Network Switch

IM-FP144GW series is the 10/100/1000 Mbps Outdoor Poe Switch enjoying below features

Comply with IEEE802.3af/at
Power on PoE IP cameras through the Ethernet cable
Simple construction
Power range up to 100 meters
Operating temperature -40℃ to + 75 ℃
Meet IP40 protection degree and EMC industrial grade requirements
DIN rail installation,
Pass through dangerous environmental certification and comply with FCC and CE standards

The reliable industrial grade design could ensure continuous and stable operation of the automation system.

Key Features of 2.5G Fiber Switch

Support power on POE IP cameras through the wireless access point (AP) of 5 categories of Ethernet cable.
IEEE 802.3af/at power on to 1 ~ 4 RJ45 ports
4 x 10/100/1000Mbps Auto-sensing RJ45 ports
1 x 100/1000/2500Mbps SFP fiber port
6KV Ethernet surge protection, adapt to a harsh outdoor environment
Support Auto MDI/MDIX
Flow control mode: full duplex with IEEE 802.3x standard,half-duplex with Back pressure standard
IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
A store-and-forward switching mechanism
Operating environment temperature:-40 ° ~75 ° c
Support cable diagnosis and can locate the fault point
Support IEEE802.3az EEE (Energy Efficient Ethernet) Management, optimize power consumption
Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
Support Qos, transport classification Qos, Cos, bandwidth control
(input/output direction), storm suppression ,differentiated services
Support IEEE802.1q VLAN,VLAN port ,based Mac VLAN,IP subnet VLAN,
Protocol VLAN,VLAN convert, MVR
Support dynamic IEEE802.3ad LACP link aggregation, static link aggregation
Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating, IGMP searching
Support IGMP agent report, MLD snooping
Safety: based on port and Mac IEEE802.1X, RADIUS, ACL, TACACS+,HTTP/HTTPS, SSL/SSH v2
Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
Support software upgrade via TFTP and HTTP, firmware redundancy prevents upgrade failing
Support DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP
Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP,TFTP, QoS, ACL.

Specification of Managed Ethernet Switch

Product Name	5 Port Outdoor Poe Switch (1F+4TP)
Model No.	IM-FP144GW
Port	1 x 100Mpbs/1G/2.5G SFP port SM:1310nm/1550nm,20Km ;1490nm/1550nm, 40~120Km; MM:1310nm, 2Km 4x 10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing)
Standard	IEEE 802.3, IEEE802.3U, IEEE802.3ab, IEEE802.3z, IEEE802.1d STP, IEEE802.1w RSTP, IEEE802.1s MSTP, ITU-T G.8023 EPR/Y.1344, IEEE802.1Q, IEEE802.1X, IEEE802.3ad, IEEE802.3x, IEEE802.3af, IEEE802.3at, IEEE802.1ad, IEEE802.1p, IEEE802.1ab, IEEE802.3az
VLAND ID	4096
Jumbo Frame	9.6KB
MAC Address Table Size	8K
Switching features	Transmission mode: storage and forward System bandwidth: 56Gbps (non-traffic jam)
Network media	10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) SFP port,transmission distance: 20Km,40Km,60Km,80Km,100Km
LEDs	Power, network
Power supply	POE power supply input voltage: 48V (max 52V), Single PoE power supply output power: 15.4W (port 1~8) (802.3at standards required special instructions)
Environment	Working Temp:-40°～ 75°C Storage Temp:-40°～ 85°C Working humidity:10%～90%, non-condensing Storage humidity:10%～95%, non-condensing
Industry Standards	EMI:FCC Part 15 Subpart B Class A,EN 55022 Class A EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN 61000-4-8; Traffic Control:NEMA-TS2; Vibration:IEC 60068-2-6; Freefall:IEC 60068-2-32; Shock:IEC 60068-2-27; Rail Traffic:EN 50121-4
Safety	CE Mark ,commercial ; CE/LVD EN60950
Mechanical information	Shell:Corrugated metal shell; Safety class:IP40; Dimension:158 x 114.8 x 60mm; Mounting method: Din-rail mounting
Warranty	Replacement within 1year; 3 years repairing

Application of Ring Managed Switch

Package

1. One product, one console cable, one user manual, and one warranty card are inside one box.

2. Twenty pieces of boxes are in one carton.

FAQ

Q: Are you a manufacturer or trading company?

A: Manufacturer, and industry network total solution provider.

Q: Do you accept ODM or OEM?

A: Yes. We provide customized service for our clients.

Q: What is your minimum order quantity?

A: MOQ is one unit.

Q: Does this managed switch include the power supply?

A: No, no power adapter is included.

Q: What power supply does this POE L2 Industrial Switch need?

A: The input voltage is 9-52VDC. If the input voltage is not 48VDC-52VDC, it is a non-POE managed switch, it can also work. The power supply can be 12VDC 3A. If the input voltage is 48VDC-52VDC, it is a POE managed industrial switch.

Q: What are the POE standards?

A: This is an industrial POE+ switch. Each network port can reach 30W when the power supply is 48VDC 5A.

Q: What temperature range can this switch reach?

A: The operating temperature is -40~85℃ (-40~175°F)

Q: Is a small DIN rail included?

A: This is a DIN rail switch, but the DIN rail is not included.

Q: Is it a managed switch?

A: Yes, this is an L2 managed POE switch for industrial networks.