Industrial Managed Ethernet Switch 2.5G SFP Fiber Uplink Gigabit IP40 24VDC Fanless
Hardened SFP gigabit industrial managed Ethernet switch
Introduction to 2.5G Fiber Switch
model name: IM-FS240GW
-40 ℃ to + 75 ℃ operating temperature
dual power input DC12V~52V
support web CLI SNMP management
meet IP40 protection degree and EMC industrial grade requirements
comply with FCC and CE standards
the reliable industrial-grade design could ensure continuous and stable operation of the automation system.
- 4 x 10/100/1000Mbps Auto-sensing RJ45 ports
- 2 x 100M/1G/2.5G SFP fiber ports
- 6 KV Ethernet surge protection, adapt to a harsh outdoor environment
- Support Auto MDI/MDIX
- Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
- IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
- A store-and-forward switching mechanism
Management Features
- Support cable diagnosis and can locate the fault point
- Support IEEE802.3az EEE (Energy Efficient Ethernet) Management,
- optimize power consumption
- Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
- Support Qos, transport classification Qos, Cos, bandwidth control
- (input/output direction), storm suppression, differentiated services
- Support IEEE802.1q VLAN, VLAN port, based Mac VLAN, IP subnet VLAN,
- Protocol VLAN,V LAN convert, MVR
- Support dynamic IEEE802.3ad LACP link aggregation, static link aggregation
- Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating, IGMP searching
- Support IGMP agent report, MLD snooping
- Safety: based on port and Mac IEEE802.1X, RADIUS, ACL, TACACS+,HTTP/HTTPS, SSL/SSH v2
- Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
- Support software upgrade via TFTP and HTTP, firmware redundancy prevents upgrade failing
- Support DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
- Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP
- Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP, TFTP, QoS, ACL.
Specification of Managed Network Switch
| Product Name | 10/100/1000Mbps Managed Industrial Fiber Switch(2F+4TP) |
| Model No. | IM-FS240GW |
| Port |
2 x 100M/1G/2.5G SFP port SM:1310nm/1550nm,20Km; 1490nm/1550nm, 40~120Km MM:1310nm, 2Km; 850nm, 500-meter 4x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Standard | IEEE 802.3, IEEE802.3U, IEEE802.3ab, IEEE802.3z, IEEE802.1d STP, IEEE802.1w RSTP, IEEE802.1s MSTP, ITU-T G.8023 EPR/Y.1344, IEEE802.1Q, IEEE802.1X, IEEE802.3ad, IEEE802.3x, IEEE802.3af, IEEE802.3at, IEEE802.1ad, IEEE802.1p, IEEE802.1ab, IEEE802.3az |
| VLAND ID | 4096 |
| Jumbo Frame | 9.6KB |
| MAC Address Table Size | 8K |
| Switching features |
Transmission mode: storage and forward System bandwidth:18Gbps (non-traffic jam) |
| Network media |
10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) SFP port,transmission distance: 20Km,40Km,60Km,80Km,100Km |
| LEDs | Power, network, fiber |
| Power supply |
Input voltage: DC12-52V No-load power:5W; Reverse connection: support |
| Environment |
Working temperature: -40°～ 75°C Storage temperature: -40°～ 85°C Working humidity: 10%～90%, non-condensing Storage humidity: 10%～95%, non-condensing |
| Industry Standards |
EMI:FCC Part 15 Subpart B Class A,EN 55022 Class A EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN 61000-4-8; Traffic Control:NEMA-TS2; Vibration:IEC 60068-2-6; Freefall:IEC 60068-2-32; Shock:IEC 60068-2-27; Rail Traffic:EN 50121-4 |
| Safety | CE Mark ,commercial ; CE/LVD EN60950 |
| Mechanical information |
Shell:Corrugated metal shell; Safety class:IP44; Dimension:158 x 115 x 60mm; Mounting method: Din-rail mounting |
| Warranty | Replacement within 1year; 5 years repairing |
Application of L2 managed switch
FAQ
1 Q:Can I have any discounts?
A: Discounts will be given to repeat orders, regular clients and discount products.
2 Q:Tell me something about your packing.
A: It is neutral packing. If you have your own packing box, we support it.
3 Q: Please tell me something about your MOQ
A: Our MOQ is 1 Pcs/Pair based on USD or EUR terms.
4 Q:Something about pricing.
A: Good quality components for our products. Low prices for big and repeat orders.
5 Q: What is warranty time?
A: A year for commercial products and 3 years for industrial products. Technical support will be offered free.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.