Titanium Plate Titanium Gr1 1*1000*2000 ASTM B265 Titanium Sheet

Titanium has a metallic luster and ductility. Titanium is characterized by its low density, high mechanical strength and ease of processing. The plasticity of titanium depends largely on its purity. The purer the titanium, the more plastic it is. Good corrosion resistance, not affected by the atmosphere and seawater. At room temperature, it will not be corroded by hydrochloric acid below 7%, sulfuric acid below 5%, nitric acid, aqua regia or dilute alkali solution; Only hydrofluoric acid, concentrated hydrochloric acid, concentrated sulfuric acid can act on it. The presence of impurities in titanium greatly affects its mechanical properties, especially the interstitial impurities (oxygen, nitrogen, carbon) can greatly improve the strength of titanium and significantly reduce its plasticity. The good mechanical properties of titanium as a structural material are achieved by strictly controlling the appropriate impurity content and adding alloying elements.

Titanium plate manufacturing process

Hot forging: Forging of a metal above the recrystallization temperature.

Hot rolling: a process of rolling at temperatures higher than recrystallization.

Cold rolling: rolling process in which the plastic deformation temperature is lower than the recovery temperature.

Annealing: Heat treatment of a metal by slowly heating it to a certain temperature, holding it for a sufficient time, and then cooling it at a suitable rate (usually slow cooling, sometimes controlled cooling).

Pickling: to remove the oxide films on the metal surface by immersing the parts in an aqueous solution such as sulfuric acid. It is pretreatment or intermediate treatment of electroplating, enamel, rolling, and other processes.

Major benefit of titanium parts

1, Low density, good ductility

2, It can be customized according to the drawings required by customers

3, corrosion resistance

4, Heat resistance

5, Low temperature resistance