wifi router module indoor router waterproof wifi router
Product Overview
XJZ430 is an advanced two-carrier indoor eNodeB (eNB) compliant with 3GPP LTE TDD technology. This XJZ430 operates in either Carrier Aggregation (CA) mode or Dual Carrier (DC) mode.
offering superior indoor connectivity by providing 4x250mW of output power and using 2x2 MIMO downlink on each carrier. Quickly deploy this base station in a commercial building to instantly improve capacity and throughput while eliminating existing deadzones
TECHNOLOGY
| Standard | LTE TDD RAN (3GPP R15 compliant) |
| TDD UL/DL Configuration | 1, 2, 3*, 6* (with Special Subframe Configuration 7) |
| Frequency Band | B48 (3550 MHz– 3700 MHz) |
| Channel Bandwidth |
SC: 5/10/15/20 MHz CA: 40 MHz as maximum aggravated bandwidth |
| Multiplexing | MIMO: 2x2 (DL) |
| Security |
Radio: SNOW 3G/AES-128 Backhaul: IPsec (X.509 AES-128, AES-256, SHA-128, SHA-256) |
| Ethernet Interface | 1 optical (SFP) and 1 RJ-45 Ethernet interface (1 GE) |
| Power Supply | 12VDC 2A, PoE+/48V 0.6A, comply with IEEE 802.3at standard |
| Protocols Used | IPv4/IPv6 (Dual Stack), UDP, TCP, ICMP, SNMPv2c, NTP, SSH, IPsec, TR-069, HTTP/HTTPs, 1588v2, DHCP |
| Network Management | IPv4/IPv6, HTTP/HTTPs, SNMPv2c, TR-069, SSH, Embedded EPC |
| VLAN/VxLAN | 802.IQ/VxLAN |
| LED Indicators |
4 X STATUS LED CELL1/CELL2/ALM/PWR |
PERFORMANCE
| Peak Data Rate (DC) | 2x20 MHz | DL (Mbps) | UL (Mbps) |
| UL/DL Config 1 | 2x80 | 2x28 | |
| UL/DL Config 2 | 2x110 | 2x14 | |
| 2x10 MHz | DL (Mbps) | UL (Mbps) | |
| UL/DL Config 1 | 2x40 | 2x14 | |
| UL/DL Config 2 | 2x55 | 2x7 | |
| Peak Data Rate (CA) | 2x20 MHz | DL (Mbps) | UL (Mbps) |
| UL/DL Config 1 | 160 | 56 | |
| UL/DL Config 2 | 220 | 28 |
| 2x10 MHz | DL (Mbps) | UL (Mbps) | |
| UL/DL Config 1 | 80 | 28 | |
| UL/DL Config 2 | 110 | 14 | |
| User Capacity |
Up to 96 concurrent users per cell (4 users per TTI)
|
||
| Latency | 30 milliseconds | ||
| Receive Sensitivity | -100dBm (per channel) | ||
| Modulation | MCS0 (QPSK) to MCS28 (64QAM) | ||
| Transmit Power Range | 0 to 24 dBm per channel (combined +30dBm, configurable) (1 dB interval) | ||
| Quality of Service | Nine-level priority indicated by QoS Class Identifiers (QCI) | ||
| ARQ/HARQ | Supported | ||
| Synchronization | GPS, 1588v2 | ||
SC/CA: 96 concurrent users
DC: 96+96 concurrent usersMODULATION LEVELS (ADAPTIVE)
| MCS | Modulation Scheme | RSRP (dBm) |
| 0 - 9 | QPSK | -120 ≤ RSRP < -110 |
| 10 - 16 | 16QAM | -110 ≤ RSRP < -100 |
| 17 - 28 | 64QAM | RSRP ≥ -100 |
FEATURES
| Voice | VoLTE* |
| NSA | Supported |
| SON |
Self-Organizing Network
|
| EPC | HaloB (Embedded EPC) |
| Traffic Offload | Local breakout |
| Layer 2 Support | Transparent Bridge Mode |
Automatic setup
Automatic Neighbor Relation (ANR)
PCI confliction detection| Maintenance |
|
||||||||||||||||||||||||||||
|
* Planned for future release LINK BUDGET
PHYSICAL
|
|||||||||||||||||||||||||||||
Local/Remote Web maintenance
Online status management
Performance statistics
Fault management
Local/Remote software upgrade
Logging
Connectivity diagnosis
Automatic start and configuration
Alarm reporting
User information tracing
Signaling trace|
pBS31010 |
Neutrino430 indoor TDD eNB - LTE Release 15, 4x250mW (24 dBm), 1GE+1OPT, 3dBi built-in antenna, 3.5 GHz (3550-3700 MHz), B48.
|
FCC certification: 2AG32PBS31010
IC certification: 20982-PBS31010
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.