170gsm Breathable Sports Fabric 150cm 85% Nylon 15% Spandex 75D

Product Description

170gsm Sports Mesh 150cm 85%Nylon 15%Spandex Fabric 75D Breathable.

Composition is 85%Nylon 15%Spandex.Weight is 170gsm. The mesh style decides is breathable . if is widely sued for different kinds of garment,such as:underwear,dress,trousers,sportswear and other clothes etc.

This mesh is a fabric which includes a certain amount open spaces; a typical mesh is about 85 percent material and 15 percent holes although different mesh fabrics will vary in weight and hole size. Mesh is beneficial in sportswear as it provides good comfort and stretch and allows air to circulate and reach the skin meaning that it is ideal for ventilation areas of a garment, especially for places where heat accumulates very quickly such as on the back.

85%Nylon 15%Spandex, 150cm wide, super soft hand feel sportswear mesh fabric, technically designed for use as a lining for sports clothing, it has excellent stretch quality and very comfortable against skin contact.

Sample picture

The invention relates to a production process of leisure sportswear fabric, which is characterized in that it includes the following steps: winding 4 times twist - setting - gt; Warping - axis - warp - weft preparation - weaving - finishing; The warp yarn is 50D/72FDTY polyester low elastic yarn. There are two kinds of weft yarn, 50D/36F polyester high elastic yarn and 75D/36FFDY polyester filament yarn. The fabric uses twill weave as the basic fabric; The specific operation is as follows: a. Winding: DWP-2 high-speed winding machine is selected. When winding the warp yarn, the tension is controlled at 0.15CN/dtex, 50D polyester filament, the winding tension is controlled at 8.5CN, the winding speed is controlled at 672m/min, and the silk road channel is kept unblocked. B • Times: the tnD-90 Japanese Tsuda twirling machine is selected, because the silk is fine, the ingot speed is 12000r/min, the twist is 1300T/m, the wire is not twirling process; C. Setting: warp wire is low elastic wire, vacuum 15-7 heat setting box is selected, the process is three times vacuum and two setting, setting temperature is 95°C, two setting time is 90min; The forming process is as follows: feeding - vacuuming ① - temperature rise - setting - air release - vacuuming ② - temperature rise - setting - air release - vacuuming ③ - cooling - end; Need to wait 24 hours after shaping, and then use for the warping process, the same batch of silk, shaping must use the same type of vacuum setting box, the use of different types of vacuum setting box, easy to produce dyeing color difference; D. Warping: Toyota T500 batch warping machine is selected, and the warping speed is controlled at 400m/min; Warping tension: during warping, the additional tension is divided into sections and layered control, and the warping monofilament tension is controlled at 23CN; On the upper axis of the warp shaft, the warp yarn is directly wound on the shaft tube of the warp shaft of the conventional varieties when the machine is loaded. On the upper axis of the polye.