2019 New Touch Screen Fire Alarm Control Panel QB3100 for Gas Detectors

 QB3100 Touch Screen Fire Alarm Control Panel for Gas Detectors 

QB3100 is a new fire alarm control panel with touch screen, easy for operation and can be used with the gas detectors. The gas touch-control panel and the detectors make up of an industrial gas alarm system. The gas touch-control panel has RS485 signal or 4-20mA signal, so that it can be connected with the PC-PLC for remote monitoring, local monitoring, and field monitor, which improve the monitoring real-time and accuracy. 

Features:

• With 32 digit embedded micro processor, all the day to day functions are available from the front panel.
•   System is expandable. For 4-20mA analogue signal the capacity can be 16 channels and for RS485 signal, the capacity can be 1 to 48 channel. With unique bar graph display per channel provides an instant representation of gas concentrations
•   Intellectual Management: the gas controller integrates fully with different gas detector, different range and different gas unit.
• Alarm set-points can be set per channel individually.
•  Intelligent system for zero calibration online.
• Search for the online detectors automatically.
•  4 non-contact relay output, programmable
• 999 records of alarm, failure
•  Alarm mute and alarm reset
• 1 channel of RS485 output for connection with the upper system. 

• Mounted way: 19" rack mounted or wall mounted
• Unit: %LEL, ppm, %VOL
• Accuracy: +- 3%F.S
• Response:<=30S
• Display:240*128 dot matrix LED display actual data and system state
• Alarm : LED displays the alarm and failure, audible alarm for gas alarm and system failure.
• Output signal: Non-potential contact(3A/AC220V)
• Working ways: the trouble-free operation
• Environment: Temperature:-10~ 50 degree, humity:<=95%RH
• Power supply: AC220V+­ - 15%
• Standby power: 5AH continuous power
• Power: <=30W
• Cable required: >= RVVP 2*1.5mm2, 3*1.5mm2 or 4*2.5mm2.
• Distance: <=1000m
• Size: 280*450*90mm
• Net:5.5kg