Ss304 Carbon Steel Belt Press Dewatering System Hot Melt Strip Cooler

Naut steel belt hot melt strip cooler, it take use of material low melting point, the melting material drop on the moving belts through holes, under the effect of cooling water spray, the material is cooled and solidified in the process of moving and then cut into strips.

Material:

SUS304 stainless steel, Carbon steel, Zinc coated carbon steel,and other spare parts.

Characteristic:

High corrosion, easy to clean ,long usage time, Belt strip cooler, strip cooler machine, single steel belt strip cooler, chemical strip cooler, high strength, high capacity, high quality, Customized, low price.

Structure:

Single steel belt strip cooler: Distributing device, Steel belt cooler machine, Steel belt, Control system, and other machine parts, Custom made parts.

Principle:

For material heating, cooling, Solidification, broken. According to the molten product's viscosity range, via special over flow weir feeder,the molten product is loaded on the below constantly moving belts.

Machining:

Raw material-Reaction kettle-Heating and melting-Filter-Distributing device-Steel belt cooler-Exhaust air-Water coolecting tank cooling- Blanking- Packing

Product Usage:

For material heating, cooling, Solidification, broken. For strip cooler machine, chemical strip cooler, strip cooler for chemical industry. For Hot melt glue, Epoxy, Polyster resin, Phenolic resin, Acrylic resin, Hydrocarbon resin,and other all kinds of resin.

-- The belt cooling system has following characteristic. It uses belt's heat conductivity and water spray cooling to quickly solidified the melt. As the belt is reverse bending on the discharge end so the solidified products can separate from steel belt naturally. There's little broken dust when discharging and the flakes is protected well.

Previous: No Information

Next: No Information