MVR Mechanical Vapor Recompression Evaporator for Wastewater - 15-40 kWh/Ton Energy Efficiency, 6-25 kPa Vacuum Operation
Price:
100,000USD~2,500,000USD/SET
MOQ:
1 set
Delivery Time:
3 months
Brand:
HANPU
Product Description
MVR Mechanical Vapor Recompression Evaporator
Engineer-to-order MVR (Mechanical Vapor Recompression) evaporator purpose-built for wastewater concentration, brine volume reduction, and ZLD pre-crystallization. By mechanically recompressing secondary vapor to reuse its latent heat, the system achieves low OPEX, high recovery, and stable operation across variable industrial effluents.
Key Benefits
Energy efficiency: Electric-driven vapor recompression minimizes fresh steam after start-up
High recovery: Deep concentration of high-TDS/COD streams to cut disposal and enable resource recovery
Scaling control: Optimized ΔT/LMTD, high-velocity loops, and antiscalant dosing reduce fouling
Continuous automation: 24/7 PLC/HMI operation with recipes, alarms, historian, and remote support
ZLD-ready: Integrates with crystallizer, centrifuge, and dryer for solids discharge
Process & Thermal Economy
Secondary vapor is mechanically compressed to raise its saturation temperature and reused as the primary heating medium. Tight control of pressure, ΔT, circulation rate, and vacuum conditions maintains heat-transfer coefficients while protecting quality of condensate for reuse.
Materials & Cleanability
Wetted parts in SS316L/duplex (Ti/Hastelloy on request). Drainable layouts, large clean-outs, CIP provision, and solvent/chemical-compatible elastomers selected per duty.
Process Overview - Wastewater Concentration
Feed conditioning: screening/filtration, softening or pH trim, and deaeration to limit scaling/corrosion
MVR evaporation (vacuum): falling-film or forced-circulation body; compressor discharge sets ΔT
Condensate polishing: optional filters/RO/AC to meet reuse or discharge limits (conductivity/TOC guard)
Concentrate handling: to crystallizer/centrifuge/dryer for solids discharge or further treatment per ZLD
Automation: start/stop recipes, load following via VFD, alarm interlocks, and remote diagnostics
Key Components
MVR evaporator (falling film / forced circulation) with vapor-liquid separator
Mechanical vapor compressor (turbo/Roots) with VFD for ΔT/capacity control
Main heater, preheaters, condensers, vacuum/NCG handling skid
Instrumentation (T/P/flow/cond/level) with PLC/HMI/SCADA & historian
CIP skid; antiscalant dosing; optional condensate polishing filters/RO
Performance & Sizing
| Parameter | Typical Range* |
|---|---|
| Operation | Continuous, 24/7 |
| Shell pressure (vacuum) | ~6-25 kPa(abs), duty-dependent |
| Electric use (MVR) | ~15-40 kWh per ton of water evaporated |
| Fresh steam demand | Very low after start-up (backup/ancillary only) |
| Turndown | 50-100% with stable ΔT and quality |
| Materials | SS316L / duplex; Ti/Hastelloy on request |
*Actual performance depends on feed salinity/COD, fouling tendency, compression ratio, and heat-exchanger design.
Frequently Asked Questions
Can it integrate with our existing membranes?
Yes. Common flowsheets pair RO/NF pre-concentration with MVR for final concentration/crystallization before solids handling.
How do you manage scaling on difficult brines?
Through pretreatment, optimized ΔT/LMTD and velocity, antiscalant dosing, and scheduled CIP based on fouling indicators.
What condensate quality can we expect?
Low conductivity/TOC suitable for reuse after polishing; conductivity/TOC guards ensure compliance with site limits.
Applications
Industrial wastewater reduction, high-salinity brine concentration, and ZLD pre-crystallization.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Jiangsu Hanpu Mechanical Technology Co., Ltd
Location
Junmin Road, Huangqiao Industrial Park, Taixing, Jiangsu, China (Mainland)
Contact Person
Jim(General Director)