Hot-Dipped Galvanized Welded Steel Grating For Industrial Plant And Municipal Construction

Steel grating is orthogonally combined with bearing flat steel and cross bar according to a certain spacing and fixed by welding or press locking;The cross bar generally adopts twisted square steel,round steel or flat steel,and the material is divided into carbon steel and stainless steel.

1. At each intersection of load flat steel and cross bar,it shall be fixed by welding, riveting or press lock.

2. Pressure resistance welding or arc welding is preferred for the welding of steel grating.

3. The press lock of the steel grating can be fixed by pressing the cross bar into the load flat steel with a press.

4. The steel grating shall be processed into shapes of various sizes according to the needs of users.

5. The spacing between load flat steel and cross bar can be determined by the supplier and the demander according to the design requirements.As an industrial platform,it is recommended that the spacing of load flat steel shall not be greater than 40mm and the spacing of cross bars shall not be greater than 165mm.