Custom Solar Light 94v0 LED PCB Board Aluminium Flying Probe
Custom Solar Light 94v0 LED PCB Board Aluminium Flying Probe
Custom solar light pcb 94v-0 aluminium pcb circuit board pcb leds
What is an SMD LED PCB Board?
SMD stands for Surface Mount Device. The surface mount technology (SMT) has almost replaced the through-hole technology. However, through-hole technology is still used for the components that cannot be surface mounted. Therefore, Surface Mount LED PCB is very popular
SMDs are compact components that can be directly placed over the PCB. There is no need for a hole because the components do not have leads or might have small leads. There are only small contacts at the ends of the device that are used to make connections. Consequently, the PCBA is very compact. SMDs are soldered using reflow soldering. At first, the solder paste is applied on the bare board. Then, the components are picked and placed in the desired place. Finally, the board is passed through a reflow oven, and the components are directly mounted without any hassle.
An SMD LED PCB board contains SMD LEDs that are more compact than their through-hole equivalents. SMD LEDs are widely used nowadays. They provide higher lumen output, which improves the level of illuminance in the area. They are more efficient and brighter. This is the reason SMD LED PCB boards are preferred.
|
Layers |
Mass production: 2~58 layers / Pilot run: 64 layers |
|
Max. Thickness |
Mass production: 394mil (10mm) / Pilot run: 17.5mm |
|
Material |
FR-4 (Standard FR4, Mid-Tg FR4,Hi-Tg FR4, Lead free assembly material) , Halogen-Free, Ceramic filled , Teflon, Polyimide, BT, PPO, PPE, Hybrid, Partial hybrid, etc. |
|
Min. Width/Spacing |
Inner layer: 3mil/3mil (HOZ), Outer layer: 4mil/4mil(1OZ) |
|
Max. Copper Thickness |
UL certificated: 6.0 OZ / Pilot run: 12OZ |
|
Min. Hole Size |
Mechanical drill: 8mil(0.2mm) Laser drill: 3mil(0.075mm) |
|
Max. Panel Size |
1150mm × 560mm |
|
Aspect Ratio |
18:1 |
|
Surface Finish |
HASL,Immersion Gold, Immersion Tin, OSP, ENIG + OSP, Immersion Silver, ENEPIG, Gold Finger |
|
Special Process |
Buried Hole, Blind Hole, Embedded Resistance, Embedded Capacity, Hybrid, Partial hybrid, Partial high density, Back drilling, and Resistance control. |
FAQ:
Q1. Do you have MOQ limited?
A: We don’t have any MOQ limited, the minimum order we accept is 1pcs.
Q2: Do you offer guarantee for the products?
A: Yes, we offer 2 years warranty to our products.
Q3: How can I get a sample to check your quality?
A: After price confirmation,you can place orders for samples for your testing and evaluation.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.