25kVar Fuseless High Voltage Shunt Power Capacitor
High Voltage Shunt Power Capacitor BAM7.96-25-1W, High Voltage Capacitor
1. Overview of High Voltage Shunt Power Capacitor BAM7.96-25-1W, High Voltage Capacitor Bank
High voltage shunt capacitor (Power capacitor) is mainly used in the A.C,Power system with 50Hz or 60Hz to improve power factor, reduce reactive power loss, mend voltage quality, plenitude elaborate generate power' equipment and supply power equipment efficiency, it is national recommend save power products.
2. Function of High Voltage Shunt Power Capacitor BAM7.96-25-1W, High Voltage Capacitor Bank
| Rated voltage |
11KV Special specifications can be negotiated . |
| Rated frequency | 50Hz；60Hz |
| Rated Capacity | 25 kvar |
| Insulation level | 38/95kV |
| Protection method |
Fuseless
|
| Number of phases | single-phase |
| Capacitance deviation | -3%～+5% |
| Package | Export packing |
| Loss tangent value (tanδ) | ≤0.0002 |
| Discharge resistance | The capacitor is equipped with a discharging resistor. After being disconnected from the grid, the voltage on the terminal can drop below 50V within 5 minutes |
3. Main features of High Voltage Shunt Power Capacitor BAM7.96-25-1W,High Voltage Capacitor Bank
(1) In the transmission line, high-voltage capacitors can be used to form a series compensation station to improve the transmission capacity of the transmission line.
(2) In large-scale substations, high-voltage capacitors can be used to form a static phase-controlled reactor type dynamic reactive power compensation device (SVC) to improve power quality.
(3) At the end of the distribution line, the use of high-voltage capacitors can improve the power factor at the end of the line and ensure the voltage quality at the end of the line.
(4) High-voltage capacitors are installed in the middle and low-voltage bus sections of the substation to compensate for the reactive power consumed by the load and improve the power factor on the bus side.
(5) In load terminal stations with non-linear loads, high-voltage capacitors will also be installed for filtering.
4. Working Conditions of High Voltage Shunt Power Capacitor BAM7.96-25-1W,High Voltage Capacitor
- 5.1 Applicable for indoor and outdoor
- 5.2 The altitude of the installation site generally does not exceed 2000 meters
- 5.3 Temperature category: -40/D
- 5.4 There is no gas or steam that is severely corrosive to metals.
- 5.5 No strong mechanical vibration
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.