9.1KV High Voltage Shunt Capacitor 300kVar - Power Capacitor - Capacitor Bank

1. Overview of 9.1 High Voltage Shunt Capacitor 300kVar - Power Capacitor - Capacitor Bank

High voltage parallel capacitor is composed mainly of the packet, shell and insulation porcelain, the packet is connected in a particular way by dozens of components, separated by insulation and wrapped. The shell is welded with thin steel plate (or stainless steel plate),the two sides of the wall have the bracket for welding and installing. The lid of box is covered with (or embedded pressure assembly) line casing,components are made of polypropylene film and aluminum foil,and the capacitor is filled with excellent electrical insulation liquid impregnant.

2. Function of .1 High Voltage Shunt Capacitor 300kVar - Power Capacitor - Capacitor Bank

       High voltage shunt capacitor are suitable for 50Hz or 60Hz AC power systems to improve the power factor of the power system, reduce line losses, improve the quality of the power supply voltage, and increase the active output of the transformer.

3. Main features of 9.1KV High Voltage Shunt Capacitor 300kvar - Power Capacitor - Capacitor Bank

• 3.1 Casing: Cold-pressed, anti-fouling type casing is adopted, and the creepage distance is not less than 31mm/kV.
• 3.2 Mature internal fuse technology.
• 3.2.1 After testing, the internal fuse can isolate the faulty component within 0.2ms, the release energy of the fault point is not more than 0.3kJ, and the remaining intact components are not affected.
• 3.2.2 Advanced concealed internal fuse structure, using oil gap arc extinguishing, reducing the possibility of blasting the capacitor case.
• 3.2.3 The internal fuse protection and relay protection have perfect coordination standards to ensure the safe and reliable operation of the entire device.
• 3.3 Liquid medium: 100% insulation oil (NO PCB) is used. This liquid has excellent low temperature performance and partial discharge performance.
• 3.4 The main insulation adopts a composite insulation structure, which not only guarantees excellent electrical performance, but also has a certain degree of mechanical strength, which ensures that the insulation of the capacitor complete set of devices is 100% reliable without protection.

 4. Applicable standard of 9.1 High Voltage Shunt Capacitor 300kvar - Power Capacitor - Capacitor Bank

     IEC60871 and equivalent standard

5. Conditions of Operation

Altitude:Less 1000m;Ambicnt Temperature:-40℃ to 40℃.

No violcnt mcchanical vibration, no harmful gas and vapor ,no electric,and cxplosive dust in location.

Power capacitor will work in the good ventilate condition, it would not permit to work in sealing and no ventilate condition.

Power capacitor connection wire should take soft conductive wire, the whole circuit connect well.