2 Core Fiber Optic FTTX Cable SM/MM GJYXCH Anti Bending
FTTH fiber optic drop cable SM/MM GJYXCH 2 core fiber cable anti-bending good performance
1. Small size, light weight, simple structure, easy to strip for its special groove design and no need any tool, low contruction cost, easy to install.
3. Using LSZH materials to achieve optical cable for indoor use requirements for flame retardant.
4. fiber used in line with ITU-T G657A technical requirements for anti-bending optical fiber.
Optical cable charateristics
1. Cable Description
Transportation and storage temperature: －10℃～＋60℃
Installation temperature: －5℃～＋50℃
Operation temperature: －10℃～＋60℃
1.2 Minimum allowable bending radius
Static: 10H
Dynamic: 20H
Optical properties of the SM fiber are achieved through a germanium doped silica based core with a pure silica cladding which meets ITU-T G657A1, UV curable acrylate protective coating is applied over the glass cladding to provide the necessary maximum fiber lifetime.
Geometrical, optical, and mechanical characteristics of fiber in cable as the following table:
| Category | Description | Specification | |
| Before cable | After cable | ||
| Geometrical Characteristics | Cladding diameter | 125.0 ± 0.7 mm | |
| Cladding non-circularity | £ 1.0 % | ||
| Coating diameter |
245± 10 mm(Before Colored) 250 ± 15 mm (Colored) |
||
| Fiber curl (Radius) | ³ 4 m | ||
| Core concentricity error | £ 0.5 mm | ||
| Optical Characteristics | Mode field diameter at 1310 nm | 8.6± 0.4 mm | |
| Mode field diameter at 1550 nm | 10.1 ± 0.5 mm | ||
| Point discontinuity | £ 0.05dB | ||
| Attenuation at 1310 nm | £ 0.34dB/km | £ 0.40 dB/km | |
| Attenuation at 1383 nm | £ 0.31dB/km | £ 0.40 dB/km | |
| Attenuation at 1550 nm | £ 0.20dB/km | £ 0.30dB/km | |
| Attenuation at 1625 nm | £ 0.23dB/km | £ 0.30dB/km | |
| Dispersion in 1285 – 1330 nm | £ 3 ps/(nm·km) | ||
| Dispersion in 1271 – 1360 nm | £ 5.3 ps/(nm·km) | ||
| Dispersion at 1550 nm | £ 18 ps/(nm·km) | ||
| Dispersion at 1625 nm | £ 22 ps/(nm·km) | ||
| Zero dispersion wavelength | 1300 – 1324 nm | ||
| Zero dispersion slope | £ 0.092 ps/(nm2·km) | ||
| Cable cut-off wavelength | £ 1260 nm | ||
| Polarization mode dispersion individual fiber | £ 0.2 ps/Ökm | ||
| Polarization mode dispersion design link value (M=20, Q=0.01%) | £ 0.1 ps/Ökm | ||
| Macro-bend loss (10 turns, 15mm radius,) |
£0.25 dB at 1550nm £1.0 dB at 1625nm |
||
| Macro-bend loss (1 turns, 10mm radius,) |
£ 0.75 dB at 1550nm £1.5 dB at 1625nm |
||
| Mechanical Specification | Proof stress level | ³100kpsi (0.69 GPa) | |
Cable Specification
|
Item |
contents | Value |
|
Fiber |
Number of fibers |
2 |
|
Fiber type |
SM/G657A1 | |
| Color | Blue /Orange | |
| Strength member | Material | KFRP |
| Diameter(mm) | 0.5±0.05 | |
| Count | 2 | |
| Messenger wire | Material | Steel wire |
| Diameter(mm) | 1.2±0.05 | |
| Outer sheath | Material | FR-LSZH(UV Resistant) |
| Color | White | |
|
Reaction to fire |
IEC60332-1 | |
|
Cable diameter(mm) Approx. |
5.3±0.1× 2.0±0.1 | |
|
Cable weight(kg/km) Approx. |
/ | |
Mechanical Performance of Cable
| Tensile performance(N) | Crush(N/100mm) | ||
| Short term | Long term | Short term |
Long term |
| 600 | 300 | 2200 |
1000 |
Fiber sort: Single mode:G652,G655,G657, Multi mode:OM1,OsM2,OM3,OM4.
Fiber brand: YOFC, Corning, Fiberhome,Fujikura,OFS etc.
The fiber and tube color: according to stranded color, can be required.
The cable Size: Negotiable
Length of cable: Negotiable
Other requirement: Negotiable
Picture
Marking and shipping
Unless otherwise specified, the cable sheath marking shall be as follows:
Color: Black
Contents: the year of manufacture, the type of cable, length marking
Interval: 1m
2. Packaging and Shipping
Reel Length
Standard reel length: 1km/reel
3. Labeling
Cable Type/Size
Cable Length
Gross Weight.
Shipping mark.
FAQ
1. We set up factories in China and Vietnam with 60,000 + SQM area and 2,000 + employees , have big production capacity to guarantee fast delivery and on-time shipment.
2. We have first-class production line and strict quality management system.
3. We have professional team to provide comprehensive one-stop service for you, Technical support is provided anytime by a team of 30 experienced engineers.
Q1: Where is your company and factory?
A1: Our headquarters is in Guangdong Province, China. Branches in HongKong , Shenzhen, Germany, United States and Vietnam, We set up factories in China and Vietnam. You are warmly welcome to visit us.
Q2: How many years experience in producing?
A2: More than 24 years,and We have more than 30+ engineers to provide technical support for you
Q3: Can I get the sample?
A3: Sure, Sample is available any time
Q4: How is quality for your products?
A4: We have a strict and strong quality management system, each production link has professional staff to check the quality. We have obtained ISO9001, IEC-61754, TIA/EIA-604, GR326, RoHS certificates.
Q5: Can I print my own logo?
A5: Sure, OEM is available.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.