Endhooked Concrete Steel Fiber in Hydro Power Station for Reinforcement
Endhooked Concrete Steel Fiber in Hydro Power Station for Reinforcement
Concrete Steel Fiber introduction
Concrete steel fiber is manufactured by high quality wire rod with 6.5mm, which has excellent mechanical properties including high tensile strength. Hence, the average tensile strength of the reinforced fibre surpasses 1350MPa. Due to this high strength,the uniform distribution of fibers, stresses can be fully dispersed and cracking be effectively controlled.
Refers to loose steel fiber and glued steel fiber.the big difference between loose and glued fibers is that the former is easy to block together and the latter is easy to disperse uniformly.
Specification of Concrete Steel Fiber
| Hooked Ends Steel Fiber |
Model | Diameter (mm) | Length (mm) | Aspect ratio (mm) | Tensile strength (MPa) | ||||
| YS-60/60 | 1 | 60 | 60 | ≥1000 | |||||
| YS-50/50 | 1 | 50 | 50 | ≥1000 | |||||
| YS-65/60 | 0.9 | 60 | 65 | ≥1000 | |||||
| YS-55/50 | 0.9 | 50 | 55 | ≥1000 | |||||
| YS-80/60 | 0.75 | 60 | 80 | ≥1000 | |||||
| YS-45/35 | 0.75 | 35 | 45 | ≥1000 | |||||
| YS-50/30 | 0.6 | 30 | 50 | ≥1100 | |||||
| YS-55/30 | 0.55 | 30 | 55 | ≥1100 | |||||
| YS-65/35 | 0.53 | 35 | 65 | ≥1100 | |||||
| YS-60/30 | 0.5 | 30 | 60 | ≥1100 | |||||
| YS-50/25 | 0.5 | 25 | 50 | ≥1100 | |||||
| YS-60/25 | 0.4 | 25 | 60 | ≥1100 | |||||
Application:
- Shotcrete, tunnel linings.
- Mass concrete composite deck construction.
- Precast concrete.
- Industrial slabs on ground
- High-speed railway
- Hydro power station
- Military project
- Aircraft runway
Dosing and mixing
- Introduce fibers with sand and aggregates.
- Add fibers to fresh concrete
- Mixing it with mixtures for 1-2 minutes and then water to stir
Products and delivery
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.