Hot Rolling 2.5%-3.5% Al Magnesium Alloy Ingot AZ61 AAZ91 ASTM G-97
Magnesium Alloy Rod Magnesium Anode AZ61 AZ80 AZ91 ZK60
Magnesium alloy rod
Application: Applied to Magnesium Alloy plates, strips, tubes, rods, profiles, wires and the alloy ingots and slabs used for them.
Processing Technology: Semi-continuous casting method.
Magnesium Alloy Chemical composition:
| Alloy Element | Type | Chemical Composition% | Other elements b | ||||||||||||
| Mg | Al | Zn | Mn | Ce | Zr | Si | Fe | Ca | Cu | Ni | Be | Sub-total | total | ||
| MgAlZn | AZ31B | Balance | 2.5-3.5 | 0.6-1.4 | 0.1-0.2 | --- | --- | ≦0.08 | ≦0.003 | ≦0.04 | ≦0.01 | ≦0.001 | --- | ≦0.05 | ≦0.30 |
| AZ40M | Balance | 3.0-4.0 | 0.2-0.8 | 0.15-0.5 | --- | --- | ≦0.10 | ≦0.05 | --- | ≦0.05 | ≦0.005 | ≦0.01 | ≦0.01 | ≦0.30 | |
| AZ80A | Balance | 7.8-9.2 | 0.2-0.8 | 0.12-0.5 | --- | --- | ≦0.10 | ≦0.005 | --- | ≦0.05 | ≦0.005 | --- | --- | ≦0.30 | |
| AZ91D | Balance | 8.5-9.5 | 0.45-0.9 | 0.17-0.4 | --- | --- | ≦0.08 | ≦0.004 | --- | ≦0.025 | ≦0.001 | 0.0005- 0.003 |
≦0.01 | ≦0.30 | |
| MgMn | M2M | Balance | ≦0.20 | ≦0.30 | 1.3-2.5 | --- | --- | ≦0.10 | ≦0.05 | --- | ≦0.05 | ≦0.007 | ≦0.01 | ≦0.01 | ≦0.20 |
| MgZnZr | ZK61M | Balance | ≦0.05 | 5.0-6.0 | ≦0.10 | --- | 0.3-0.9 | ≦0.05 | ≦0.05 | --- | ≦0.05 | ≦0.005 | ≦0.01 | ≦0.01 | ≦0.30 |
| MgMnRe | ME20M | Balance | ≦0.20 | ≦0.30 | 1.32-2.2 | 0.15-0.35 | --- | ≦0.10 | ≦0.05 | --- | ≦0.05 | ≦0.007 | ≦0.01 | ≦0.01 | ≦0.30 |
Compared with conventional casting magnesium alloys, semi-continuous casting magnesium alloys are finer in the organization, more uniform on the ingredients, and more compact inside with higher strength and elongation.
1. By pipetting and secondary refining, the Mg alloys have high purity and low impurity. The magnesium liquid pouring directly from the heat holding furnace crystallize rapidly to improve the compactness of internal microstructure of the Mg rods. The internal crystal are more compact , and the physical performance is greatly enhanced compared to conventional casting products.
2. The flux slag content of finished products tends to zero. Using the emerging insert gas protective devices, the flux slag content are greatly reduced and product quality is improved. In traditional process, the smelting process is completely exposed to the air, and the flame is retardant only by flux and other flame retardant materials.
3. Smooth surface. Clean. No porosity, shrinkage or slag.
4. Flexible length. The existing maximum diameter is 600mm. It can be skinned and cut according to customers' requirements. In addition, other products with different specifications can be produced to meet customers needs. We can also produce various specifications of Mg alloy flat bars by semi-continuous casting.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.