ZK60A T5 High Strength Extruded Magnesium Alloy Plate Chinese Supplier
Introduction:
Magnesium alloy is an indispensable material for aviation and aerospace industry. The economic benefit and performance improvement brought by aviation material weight reduction is very significant. The same quality of commercial aircraft and automobile weight reduction brings fuel cost savings. The former is nearly 100 of the latter. In addition, the fuel cost of the fighter is nearly 10 times that of the commercial aircraft. More importantly, the improved maneuverability can greatly improve its combat effectiveness and survivability. Because of this, the aviation industry will take various measures to increase the application of magnesium alloys. The aluminum materials used in aircraft today account for about 85% of the total weight of the aircraft. High-strength, corrosion-resistant magnesium alloy plates perform better than aluminum plates and have advantages in aircraft applications.
Parameter:
|
Specification of magnesium alloy:
|
|
Magnesium Alloy Plates/sheet
|
classify
|
specification
|
|
Brand
|
AZ31B/ZK60A/AZ91D/AZ61A/AZ40M/AZ41M/AZ80A
|
|
Sheet
|
Thickness:0.3-7.9mm Customized Max.width 600mm
|
|
Medium and heavy plate
|
Thickness:8-15mm Customized Max.width 1500mm
|
|
Thick plate
|
Thickness:15-200mm Customized Max.width 3000mm
|
|
Magnesium Alloy Bar/Rod
|
Brand
|
AZ31B/ZK60A/AZ91D/AZ61A/AZ40M/AZ41M/AZ80A/Mg99.95
|
|
Extrusion Bar
|
φ3-φ130*3000(Customized)
|
|
Cast round bar billet
|
φ93-φ600*4500(Customized)
|
|
Magnesium alloy profiles
|
Size
|
Customized
|
|
|
|
|
|
|
Magnesium Photoengraving Plate
|
|
|
|
Magnesium Photoengraving Plate
|
|
|
|
Magnesium Photoengraving Plate
|
|
|
|
Magnesium Photoengraving Plate
|
|
|
|
Magnesium Photoengraving Plate
|
|
|
|
Magnesium Photoengraving Plate
|
|
|
|
Magnesium Photoengraving Plate
|
|
|
|
Magnesium Photoengraving Plate
|
|
|
|
Magnesium Photoengraving Plate
|
|
|
|
Magnesium Photoengraving Plate
|
|
|
|
Magnesium Photoengraving Plate
|
|
|
|
Magnesium Photoengraving Plate
|
|
|
|
![]()
Application:
Our product are widely used in transportation (automobiles, motorcycles, bicycles, rail transit, aviation); electronic products (computers, mobile phones, digital cameras, etc.); medical equipment (wheelchairs, crutches, rehabilitation fitness equipment, etc.) aerospace; textile High standards and diversified demands in the fields of printing machinery and automobiles.
Magnesium alloy casting production can customized as your requirement. the technical process is great, extrusion production required for a variety of bar, no need to purchase from abroad, extrusion molding products is easy molding, low energy consumption, saving production costs.
Fabrication:
The weldability of most magnesium alloys is good when proper filler metal in employed. A filler metal with a lower melting point and a wider freezing range than the base metal will provide good weldability and minimize weld cracking. AZ61A or AZ92A filler metals may be used to weld base metals of similar composition and also ZK21A base metal.
AZ61A filler metal is generally preferred for welding wrought base metals of those alloys because of lower cracking tendency. However, welds made in cast Mg-Al-Zn and AM100A base metals with AZ92A filler metal show less crack sensitivity. The weld metal will respond to the precipitation heat treatments normally applied to repaired castings. AZ101A filler metal may also be used to weld those cast base metals. EZ33A filler metal is used to weld wrought and cast base metals designed for elevated-temperature service; however, this filler metal should not be used for welding aluminum-bearing magnesium alloys because of severe weld cracking problems. When no other filler metal is available, most base metals may be welded with strips cut from the base metal.
![]()
