China PurePath 2TPD Engine Oil Recycling Plant Environment Friendly for sale

PurePath 2TPD Engine Oil Recycling Plant Environment Friendly

Price Negotiable

Price: USD88000/SET~USD238000/SET

MOQ: 1Set

Delivery Time: 60-90days

Brand: PurePath

Product Description

PurePath Factory Price Provide Full Set Design Drawings Waste Engine Oil Recycling Plant

Production Introduction of Waste Engine Oil Recycling Plant

PurePath PPGT-BP removes all the contaminants from the used lube oil and recovers distillates product as high quality base oil either API Group I by chemical finishing or API Group II by solvent extraction refining.

PurePath PPGT-BP oil refining process adopts continuous TFE/WFE/SPD technology and also batch as options. It does not release harmful or pollutant wastes to be disposed and is therefore environment friend.

Technical Process Description of Waste Engine Oil Recycling Plant

Dehydration: used oil is preheated to remove water, gasoline, VOC, light contaminants (solvents, glycols, lighter organic). Water is sent to treatmentand lights (gasoline) are used as substitution fuel.
Gasoil removal: dehydrated oil is stripped under vacuum for light gasoil removal and flash point adjustment of lube oil.
Vacuum distillation: oil from gasoil stripper is sent to vacuum distillation to recover vacuum distillate oil fraction from “heavier than” contaminants.
Vacuum distillation is carried out under high vacuum conditions, high temperature and by thin film evaporator.
Thin film evaporator achieves high selectivity and oil purification from metals, heavy polymers, carbon, dust.
Refining: Oil distillates from vacuum distillation process is sent to refining tanks or polishing system for properties improvement.

Plant Specification of Waste Engine Oil Recycling Plant

Model No.	PPGT-BP-1	PPGT-BP-2	PPGT-BP-3	PPGT-BP-4	PPGT-BP-5	PPGT-BP-6	PPGT-BP-7	PPGT-BP-8
Items.
Process Capacity MAX.	2 TPD	5 TPD	10 TPD	15 TPD	20 TPD	30 TPD	50 TPD	100 TPD
Heating Power	17KGS LPG/20KGS FUEL OIL/230KWH/PER TON OF WASTE OIL
Power Consumption	25KWH PER TONS OF WASTE OIL
Vacuum Degree	≦-0.05KPa
Heating Method	Fuel Oil/Natural Gas/LPG/Electricity
Heating Temp.	30-350℃
Voltage	220/380/415V 50/60HZ
Noise	≤60dB

Advanced Technology of Waste Engine Oil Recycling Plant--TFE

Features and advantages of a TFE

Short residence time and high turbulence in the film give high heat transfer coefficient and avoid overheating, cracking and fouling.
High evaporation rate is obtained by a simple pass
High oil yield is achieved without degradation or polymerization of the oil
Durable and easy maintenance.
Lower maintenance cost.

Performances of Base Oil Product from Waste Engine Oil Recycling Plant

End Product	Application of oil products
80%~85% API Group I&II Base oil	1. Directly sell by 200L barrels or truck-car. 2. Blending with compact additive to produce 5W, 10W, 15W lubricant oil for engines. 3. Blending to produce grease, SEA32, SEA46 hydraulic oil and other machine lube oil.
5%~10% LGO	1, Salable as fuel oil for burner providing to cement factory, glass factory, ceramic factory, electric power factory, steel making factory, boiler factory, etc. 2, Used to ethylene manufacturing. 3, Blending with asphalt to improve it's properties.
5~10% Sludge oil	1, Used to asphalt production 2, Sell as fuel oil for heavy machinery 3, Further processed by coking increasing the yield of light fuel oil.

PROPERTY	METHOD	RESULT UNITS
Type		LBO	HBO
Appearance	Visual Inspection	Bright&Clear	Bright&Clear
Color scale	ASTM D1500	≤1	≤1.5
Water Content	ASTM D1744	Trace (% wt)	Trace (% wt)
Kinematic Viscosity at 40℃	ASTM D445-15a	32.170 mm2/s	67.420 mm2/s
Viscosity Index	ASTM D2270-10	117	122
Total Sulfur Content	ASTM D4294-16e1	0.0071 %(m/m)	0.0093 %(m/m)
Density at 15 ℃	ASTM D4052-18	0.898 kg/m3	0.917 kg/m3
Pour Point	ASTM D97-17b	-18 ℃	-21 ℃
Copper Strip Corrosion (3h/100℃)	ASTM D130-18	1a Rating	1a Rating
Total Acid Number	ASTM D974	0.01(mg KOH/g)	0.01(mg KOH/g)
Carbon Residue Conradson	ASTM D189	0.01(% wt)	0.01(% wt)
Smell	Organoleptic	No Smell	No Smell