Genuine Automatic Engine Oil Recycling Machine 3-5 Labors
3-5 Labors Easy Operation Genuine Automatic Control Used Engine Oil Recycling Machine
Production Introduction of Used Engine Oil Recycling Machine
PurePath PPGT-BP Series Waste Oil Recycling Plant is to recycle used engine oil as the light yellow base oil, the color stand is formed 1-1.5, flash point is more than180℃. It could not only remove the water impurities, but also remove carbon, heavy metal, oxides as well as bad substance as colloid and bitumen, the recycled base oil we get from the machine ranges from SN70~SN500, typical base oil products like SN150, SN250, SN350,SN500 etc.
This equipment adopts vacuum distillation technology, and physicochemical actions to flocculate,passivate, absorb and eliminate impurities and harmful contamination. A new chemical alkaline complex catalyst is used to assist the physicochemical action, it also helps to remove some organic acid and upgrade the base oil quality.
Technical Process Description of Used Engine Oil Recycling Machine
- Dehydration: used oil is preheated to remove water, gasoline, VOC, light contaminants (solvents, glycols, lighter organic). Water is sent to treatmentand lights (gasoline) are used as substitution fuel.
- Gasoil removal: dehydrated oil is stripped under vacuum for light gasoil removal and flash point adjustment of lube oil.
- Vacuum distillation: oil from gasoil stripper is sent to vacuum distillation to recover vacuum distillate oil fraction from “heavier than” contaminants.
- Vacuum distillation is carried out under high vacuum conditions, high temperature and by thin film evaporator.
- Thin film evaporator achieves high selectivity and oil purification from metals, heavy polymers, carbon, dust.
- Refining: Oil distillates from vacuum distillation process is sent to refining tanks or polishing system for properties improvement.
PurePath PPGT-BP Used Engine Oil Recycling Machine Merits
- All pumps and valves doubled options to avoid plant shut down in case of pump or valve failure.
- Full set of DCS/PLC/SCADA options plant automation for continuous operation.
- Indirect heating of thermic fluid streams to prevent fouling.
- Special mechanical design for thermal flexibility, vacuum operation and
- fouling services.
- Use of antifouling to reduce maintenance and cleaning operation.
- Proprietary design of Base Oil Finishing for API Group I and Group II standard.
Plant Specification of Used Engine Oil Recycling Machine
| Model No. | PPGT-BP-1 | PPGT-BP-2 | PPGT-BP-3 | PPGT-BP-4 | PPGT-BP-5 | PPGT-BP-6 | PPGT-BP-7 | PPGT-BP-8 |
| Items. | ||||||||
| Process Capacity MAX. | 2 TPD | 5 TPD | 10 TPD | 15 TPD | 20 TPD | 30 TPD | 50 TPD | 100 TPD |
| Heating Power | 17KGS LPG/20KGS FUEL OIL/230KWH/PER TON OF WASTE OIL | |||||||
| Power Consumption | 25KWH PER TONS OF WASTE OIL | |||||||
| Vacuum Degree | ≦-0.05KPa | |||||||
| Heating Method | Fuel Oil/Natural Gas/LPG/Electricity | |||||||
| Heating Temp. | 30-350℃ | |||||||
| Voltage | 220/380/415V 50/60HZ | |||||||
| Noise | ≤60dB | |||||||
Advanced Technology of Used Engine Oil Recycling Machine--TFE
|
Features and advantages of a TFE
|
 |
Performances of Base Oil Product from Used Engine Oil Recycling Machine
| PROPERTY | METHOD | RESULT UNITS | |||||
| Type | LBO | HBO | |||||
| Appearance | Visual Inspection | Bright&Clear | Bright&Clear | ||||
| Color scale | ASTM D1500 | ≤1 | ≤1.5 | ||||
| Water Content | ASTM D1744 | Trace (% wt) | Trace (% wt) | ||||
| Kinematic Viscosity at 40℃ | ASTM D445-15a | 32.170 mm2/s | 67.420 mm2/s | ||||
| Viscosity Index | ASTM D2270-10 | 117 | 122 | ||||
| Total Sulfur Content | ASTM D4294-16e1 | 0.0071 %(m/m) | 0.0093 %(m/m) | ||||
| Density at 15 ℃ | ASTM D4052-18 | 0.898 kg/m3 | 0.917 kg/m3 | ||||
| Pour Point | ASTM D97-17b | -18 ℃ | -21 ℃ | ||||
| Copper Strip Corrosion (3h/100℃) |
ASTM D130-18 | 1a Rating | 1a Rating | ||||
| Total Acid Number | ASTM D974 | 0.01(mg KOH/g) | 0.01(mg KOH/g) | ||||
| Carbon Residue Conradson | ASTM D189 | 0.01(% wt) | 0.01(% wt) | ||||
| Smell | Organoleptic | No Smell | No Smell | ||||
Company Profile
Chongqing PurePath Green Technology Co., Ltd. (the PurePath) was founded in 2007 and headquartered in Jiulongpo, Chongqing, China. The PurePath owns its unique engineers team to provide designs and manufactures complete, turnkey, skid mounted systems which recover near virgin grade base oil and diesel from waste lubricants. PurePath has been testing, engineering, designing, fabricating, installing and operating waste oil re-refining and distillation systems since its inception. Our mission is to facilitate environmental restoration, resource recovery and pollution reduction through innovative technologies and design, construction, and operation of affordable state-of-the-art waste recovery systems.
The PurePath currently focused on the waste oil recycling solutions. On the whole, the company's product ranges includes the following:
- Used lube oil re-refining system: refining used oil to API group I, API group II base lube oil.
- Catalytic cracking distillation machine: cracking waste oil to commerical standard diesel, ultra low sulfur diesel technical process is optional.
- Upgrade oil polishing equipment: to polish base lube oil or diesel to near virgin grade with water color.
- Solvent recovery plant: to recovery various solvent from waste.
- Machine lube oil purifier: to regenerate various machine lube oil from used.
OEM and ODM services are available.
Factory Show
Customer Visiting
Successful Project Show
Please do not hesitate to contact us.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.