Pensky Martens Closed Cup Flash Point Tester SY-261-1 ASTM D93 Standard
SY-261-1 Pensky-Martens Closed Cup Flash Point Tester
Application:
It is used to make determination of the closed cup flash point of the petroleum products by Pensky-Martens closed cup method.
Standard:
ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester.
GB/T 261-2008 Determination of Flash Point - Pensky-Martens closed cup method and
Parameters:
| Item | Name | Details |
| 1 | Igniting device | Igniting source: gas(or other civilian fuels,the same below) |
| 2 | Heating device | The furnace is silicon carbide material. Power is 600W |
| 3 | Heating rate | Procedure A: (5～6)℃/min, Procedure B:(1～1.5)℃/min |
| 4 | Maximum power consumption | =<650W |
| 5 | Stirring device | Stirring motor: BYGH101 stepping motor |
| 6 | Driving mode | flexible shaft, 8mm×40mm |
| 7 | Stand oil cup |
Internal diameter:50.7mm～50.8mm Depth: 55.7mm～56.0mm |
| 8 | Ambient temperature | (15~35)℃ |
| 9 | Relative humidity | =<85% |
| 10 | Power supply | AC 220+/-10% V, 50Hz |
| 11 | Dimension | 340mmx330mmx380mm |
Features:
1. The structure is newly design and small. Stainless steel table-board looks clean and beautiful. It can be used as long as equipped with gas or other civilian fuels. It is easy to use and test results exact.
2. Single chip microcomputer control technique LCD screen displays. English man-machine interaction interface. The heating power is continuously step-less adjustable. The rate of heating up is exact. Easy setting for parameters.
3. The LCD screen has prompting menu, prompting input operation interface. It shows the set parameters, real-time temperatures and other test parameters. Press the “record” button when the flash point appears. The screen will show and reserve the flash point.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.