High Accurate Water Level Meter Measurement Steel Ruler
Accurate Measurement Steel Ruler Water Level Gauge
Instruction
During measurement, after the coil has been rotated, press the power, and put the probe into the water pipe, then hold the steel ruler cable, let the probe moves down slowly.
The sounder will gives a continuous beep when the contact point touches the water surface, then can read the depth of the steel ruler at the pipe mouth, that is the distance from the underwater level to the pipe mouth .
Parameters
| Specification | 30 | 50 | 100 | 150 | 200 | 300 | 500 |
| Measurement dept(m) | 0~30 | 0~50 | 0~100 | 0~150 | 0~200 | 0~300 | 0~500 |
| Minimum reading(mm) | 1.0 | ||||||
| Repetitive reading(mm) | ±2.0 | ||||||
| Operating voltage (V) | DC=9 | ||||||
Maintenance
Due to the battery capacity, please turn off immediately after the measurement is completed! Remove the battery cover and replace the battery (9V battery, multimeter battery).
Keep the probe and the steel ruler cable clean after use, and put the steel ruler cable neatly around the reel, and be placed in the cabinet.
Don’t bend the measuring cable , especially when it is close to the head, to avoid the cable to be damaged.
Put the probe gently to avoid severe vibration. If the probe got any problem, please send back to our factory.
Pictures
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.