LCA316T/LCA326T MEMS Tilt Sensor Enables Accurate Industrial Leveling and Attitude Monitoring
LCA316T/LCA326T series products are a new generation of digital small volume MEMS tilt sensor launched by RION Technology. It has a built-in dual-channel earth gravity tilt unit, which can be converted into tilt angle changes by measuring static gravity acceleration. So that the tilt angle of the sensor output relative to the horizontal plane can be measured. Output method CAN2.0A/B. Because it is a built-in MCU control system, which correct the linearity of the sensor output twice, making up the accuracy drop for the analog type because of insufficient correction.
This product uses non-contact measurement of the original quantity, can output the current attitude and inclination in real time, easy to use, without the need to retrieve the relative changes of the two sides of the installation. It is an ideal choice for industrial automation control and attitude measurement. It has strong ability to resist external electromagnetic interference. It is mainly suitable for static and slow-changing dynamic measurement, but not for fast-changing dynamic measurement. It can work in harsh industrial environment for a long time.
- Single / dual axis inclination measurement
- Range ± 10～± 90 ° optional
- Resolution 0.02 °
- DC4.5~5.5 input
- Wide temperature operation -40～+ 85 ℃
- Output mode CAN2.0A/B
- IP67 protection level
- High anti-vibration performance> 3500g
- Small size 55 * 37 * 24mm
- Electric blind chair leveling
- PTZ operation monitoring
- Satellite antenna positioning
- Medical equipment leveling
- Car chassis measurement
- Four-wheel positioning system
- Various engineering machinery angle control
| LCA316T/326T-C2/C3 CONDITION | PARAMETER | UNIT | ||||
|---|---|---|---|---|---|---|
| Feature | Specific Condition | ±10 | ±30 | ±60 | ±90 | Unit Symbol |
| Measure range | ±10 | ±30 | ±60 | ±90 | ° | |
| Measure axis | X Y | X Y | X Y | X Y | Axis | |
| Resolution | 0.02 | 0.02 | 0.02 | 0.02 | ° | |
| Measure accuracy | @25℃ | 0.1 | 0.1 | 0.1 | 0.1 | ° |
| Zero Temp. coefficient | -40~85℃ | ±0.02 | ±0.02 | ±0.02 | ±0.02 | °/℃ |
| Sensitivity temp. coefficient | -40~85℃ | ≤150 | ≤150 | ≤150 | ≤150 | ppm/℃ |
| Power on start time | 0.5 | 0.5 | 0.5 | 0.5 | S | |
| Response time | 0.02 | 0.02 | 0.02 | 0.02 | s | |
| Output rate | 5Hz / 15Hz / 35Hz / 50Hz could be set | |||||
| Output signal | CAN2.0A / CAN2.0B | |||||
| EMC | According to EN61000 and GBT17626 | |||||
| MTBF | ≥98000 hours/times | |||||
| Insulation Resistance | ≥100 MΩ | |||||
| Shockproof | 100g@11ms / 3 Axial Direction (Half Sinusoid) | |||||
| Anti-vibration | 10grms / 10~1000Hz | |||||
| Protection grade | IP67 | |||||
| Cables | standard configuration: 1 meter wearproof, grease proofing, wide temperature, Shielded cables 4*0.3mm2 | |||||
| Weight | ≤135g (including 1 meter cable) | |||||
Resolution: It refers to the smallest change value that the sensor can detect and distinguish in the measurement range.
Measure accuracy: Refers to the combined error of linearity, repeatability, hysteresis, zero deviation, and horizontal axis error of the sensor under normal temperature conditions.
Response time: It refers to the time required for the sensor output to reach the standard value when the sensor changes angle once.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.