MCA-85 Industrial Tilt Sensor 0.01° Resolution for Rail, Oil for Aerial work vehicle
▶ WORKING PRINCIPLE
Adopt the import of core control unit, using the capacitive micro pendulum principle and the earth gravity principle, when the the inclination unit is tilted, the Earth's gravity on the corresponding pendulum will produce a component of gravity, corresponding to the electric capacity will change, , by enlarge the amount of electric capacity , filtering and after conversion then get the inclination.
▶ MEASURING DIRECTIONS&FIX
The installation must guarantee the product bottom is parallel to measured face, and reduce the influence of dynamic and acceleration to the sensor. This product can be installed horizontally or mounted vertically (mounted vertically selection is only applicable to the single axis), for installation please refer to the following scheme.
▶ PRODUCTION INSTALLATION NOTES
Please follow the correct way to install tilt sensor, incorrect installation can cause measurement errors, with particular attention to the "surface", "line":
1) The Sensor mounting surface and the measured surface must be fixed closely, smoothly, stability,if mounting surface uneven likely to cause the sensor to measure the angle error.
2) The sensor axis and the measured axis must be parallel ,the two axes do not produce the angle as much as possible.
▶ APPLICATION
- Satellite positioning Search
- Rail-mobile monitoring
- oil-well drilling equipment
- Based on the angle direction measurement
- Radar detection of vehicle platform
- Ship’s navigation posture measurement
- Satellite communications vehicle posture detection
- engineering mechanical measurement of dip angle
▶ FEATURES
- Tilt Sensor
- Direct lead cable interface
- Accuracy: refer to the technical data
- Wide voltage input: 8～36V
- Wide temperature working: -40～+85°C
- Resolution: 0.01°
- IP67 protection class
- Highly anti-vibration performance >100g
▶ TECHNICAL DATA
| MCA-85 | CONDITIONS | PARAMETERS | UNIT |
| Measure range | ±85 | ° | |
| Measure axis | X,Y | ||
| Resolution | 0.01 | ° | |
| Measure accuracy | Range <±15 ° | 0.2 | ° |
| Range <±30 ° | 0.3 | ° | |
| Range >±30 ° | 0.5 | ° | |
| Long term stability | 0.1 | ° | |
| Power on time | 1 | S | |
| Response time | 0.2 | S | |
| Cross-Axis | Full range ±85° | ＜0.1 | ° |
| Temperature offset drift | -20°C~60°C | 0.007 | °/°C |
| -40°C~85°C | 0.01 | °/°C | |
| Refresh rate | 100Hz | ||
| Output Interface | SAE J1939 CAN2.0B (250 kbps Source Address:0xC0 (default); settable in the range of [0x80–0xF7]) | ||
| EMC | According to EN61000-4-2；ISO7637-2:2011；EN55011 | ||
| MTBF | ＞80000 hours | ||
| Insulation Resistance | ≥100M Ω | ||
| Shockproof | 100g@11ms,3 Axial Direction (Half Sinusoid) | ||
| Anti-vibration | 10grms,10～1000Hz | ||
| Protection glass | IP67 | ||
| Cables | 4 wire 0.3mm2 ,outer diameter Ø6.0 mm；length incl. connector 400 mm, full temperature range, flexible | ||
| Size | L70.5*W45*H15 | ||
| Weight | ＜80g(Including cable) | ||
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.