SCA116 Mems Dual Axis Digital Inclinometer CAN2.0A High Precision For Construction
SCA116 Mems Dual Axis Digital Inclinometer CAN2.0A High Precision For Construction
▶ PARAMETERS
| SCA116&126T C2 | CONDITION | PARAMETER | UNIT | |||
| Measure range | ±10 | ±30 | ±60 | ±90 | ° | |
| Measure axis | X/XY | X/XY | X/XY | X/XY | Axis | |
| Resolution | 0.01 | 0.01 | 0.01 | 0.01 | ° | |
| Absolute accuracy | @25℃ | 0.05 | 0.05 | 0.05 | 0.08 | ° |
| Long term stability | 0.05 | 0.05 | 0.05 | 0.05 | ° | |
| Zero Temp. coefficient | -40～85℃ | ±0.006 | ±0.006 | ±0.006 | ±0.006 | °/℃ |
| Sensitivity temp.coefficient | -40～85℃ | ≤100 | ≤100 | ≤100 | ≤100 | ppm/℃ |
| Power-on start time | 0.5 | 0.5 | 0.5 | 0.5 | S | |
| Response time | 0.02 | 0.02 | 0.02 | 0.02 | s | |
| Output rate | 5Hz,15Hz,35Hz,50Hz can be set | |||||
| Output signal | CAN2.0A | |||||
| EMC | According to EN61000 and GBT17626 | |||||
| MTBF | ≥50000 hours/times | |||||
| Insulation Resistance | ≥100 MΩ | |||||
| Impact resistance | 100g@11ms, 3 Axial Direction (Half Sinusoid) | |||||
| Anti-vibration | 10grms,10～1000Hz | |||||
| Protection grade | IP67 | |||||
| Cables | standard configuration: 1 meter wearproof,grease proofing,wide temperature,Shielded cables 4*0.4mm2 | |||||
| Weight | 140g(exclude cable) | |||||
* This performance parameter only lists ± 10 °, ± 30 °, ± 60 °, ± 90 ° series as a reference, for other measurement ranges, please refer to the most adjacent parameters.
▶ INTRODUCTION
SCA116T & SCA126T is a CAN2.0A output single and dual axis tilt sensor for industrial field control. It adopts industry standard isolated CAN transceiver, built-in high-precision A / D differential converter, and can be measured through a 5th order filtering algorithm. The sensor outputs the tilt and pitch angle relative to the horizontal plane.
the temperature drift of the sensor can be corrected according to the change of the built-in temperature sensor to ensure the high repeatability of the product in low temperature and high temperature environments. The output response frequency standard can be up to 100Hz. If a higher response frequency is required, our company can customize it according to the user. The product belongs to a real industrial grade product, with reliable and stable performance, good scalability, and multiple output options. Suitable for various harsh industrial control environments.
▶ FEATURES
★ Single and biaxial inclination measurement ★ Range ± 1 ～ ± 90 ° optional
★ DC 9～36V wide voltage input ★ Accuracy: 0.05 °
★ Wide temperature operation -40 ～ + 85 ℃ ★ Resolution 0.01 °
★ High anti-vibration performance> 2000g ★ Direct lead interface
★ Size: L90 × W40 × H26mm ★ Output method: CAN2.0A
▶ APPLICATION
★ Engineering vehicles automatic leveling ★ Bridge & dam detection
★ Aerial platform vehicle, lifter safety & protection ★ Medical facilities angle control ★ Underground drill posture navigation ★ Shield pipe jacking application ★ Based on the angle direction measurement ★ Geological equipment inclined monitoring
★ Mining machinery, oil-well drilling equipment ★ Equipment level control
★ Alignment control, curve control
★ Directional satellite communications antenna pitching angle measurement
▶ ELECTRONIC CHARACTERISTICS
| PARAMETERS | CONDITION | MIN | TYPICAL | MAX | UNIT |
| Power supply voltage | standard | 9 | 12,24 | 36 | V |
| customizable | 5 | V | |||
| Working current | No load | 40 | mA | ||
| Working temp. | -40 | +85 | ℃ | ||
| Store temp. | -40 | +85 | ℃ |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.