HDA536T Digital MEMS Dynamic Tilt Sensor For Engineering Vehicle,Corrosion Resistance
HDA536T digital MEMS dynamic tilt sensor For Engineering Vehicle,Corrosion resistance
▶ TECHNICAL PARAMETERS
| HDA536T-C2/C3 | Condition | Parameter | |
| Measure Range | - |
Roll±180°, pitch±90°, azimuth±180° (initial value at power-down is 0 °) |
|
| Measure Axis | - | X axis / Y axis / Z axis | |
| Roll&Pitch Resolution 1) | - | 0.01° | |
| Roll&Pitch Static Accuracy 2) | @25℃ | ± 0.05° | |
| Roll&Pitch Dynamic Accuracy (rms) | @25℃ | ± 0.1° | |
| Gyroscope | Gyroscope Range | - | ±300°/s |
| Zero-Bias Stability (10s Average) | - | 7.5°/h | |
| Zero-Bias Instability (Allan) | - | 3°/h | |
| Angular Random Walk Coefficient (Allan) | - | 0.1°/sqrt(h) | |
| Acceleration | Acceleration Range | - | ±6g |
| Zero-Bias Stability (10s Average) | - | 0.1mg | |
| Zero-Bias Instability (Allan) | - | 0.02mg | |
| Velocity Random Walk Coefficient (Allan) | - | 0.01m/s/sqrt(h) | |
| Zero Temperature Coefficient 3) | -40～85℃ | ±0.01°/℃ | |
| Temperature Coefficient Of Sensitivity 4) | -40～85℃ | ≤100ppm/℃ | |
| Power-On Start Time | ≤3.5S | ||
| Response Time | 0.01S | ||
| Output Signal | CAN2.0A / CAN2.0B | ||
| Electromagnetic Compatibility | According to EN61000 and GBT17626 | ||
| MTBF | ≥ 98,000 hours/time | ||
| Insulation Resistance | ≥ 100 megohm | ||
| Impact Resistance | 100g @ 11ms / triaxial (half sine wave) | ||
| Vibration Resistance | 10grms / 10～1000Hz | ||
| Waterproof Grade | Standard IP67, optional IP68 and corrosion-resistant IP68 protection level | ||
| Weight |
Single connector ≤165g / double connector ≤180g (excluding cable) |
||
▶ ELECTRICAL PARAMETERS
| Parameter | Condition | Min | Typ | Max | Unit | |
| Supply voltage | standard | 9 | 12 | 24 | 36 | V |
| Working current | without load | 60mA(12V) | mA | |||
| Operating temp. | -40 | +85 | ℃ | |||
| storage temp. | -40 | +85 | ℃ | |||
▶ KEY FEATURES
★ Range (Roll angle ±180 °, pitch angle ±90 °, azimuth angle ±180 °)
★ Resolution 0.01 °
★ Dynamic accuracy: ± 0.1 °
★ DC 9～36V wide voltage input
★ Wide temperature operation -40～+85 ℃
★ IP67 protection level
▶ PRODUCT APPLICATION
★ Shield pipe jacking application
★ Geological equipment tilt monitoring
★ Underground drilling rig attitude navigation
★ Ship navigation attitude measurement
★ Satellite communication vehicle attitude detection
★ Shield pipe jacking application
★ Orientation measurement based on inclination angle
How long is the delivery time of the products?
A: Usually we have stock for every type of products, if the product that you selected we have in stock, then we only need to re-test it before leaving the factory, so the delivery time is around 2~4 days; if we don’t have them in stock, then we need to arrange the production, the delivery time will be around 2 weeks. For the customer-oriented design products, our engineers will give the approximate delivery time according to the technical requirements.
Q: How about the payment conditions?
A: we accept 40% prepayment in advance, and the balance 60% payment before the delivery. For the customer-oriented design product, the payment will be discussed together.
Q: How will we do if the product has the quality problem?
A: Our products have passed very strict tests before delivery, so it is very low probability to have quality problem. If our products have quality problem (not caused by man-made factors) in the warranty period, our factory will arrange the free repair. If the product can’t repair well, we will arrange to provide a new one. If the product is out of warranty time, we will provide the repair only charging the material cost.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.