20m High Mast Transmission Steel Monopole Antenna Tower for Communication
Material:Q235,Q345 usually
Design Standard: AWS D 1.1; ASTM123, ANSI-TIA-222-H
Bolt Grade: 6.8, 8.8
Basic Wind Speed: 0-330km/h
Working and Rest Platform:height and quantity up to clients
Antenna Load: depends on clients
Steel Tube Tower Color: customized
Galvanized: according to ASTM A123 standard hot dip galvanized. We have our own galvanization plant.
Usage of Towers: GSM/CDMA Equipment
Payment: 30% deposit and 70% before shipment
Delivery Time: usually 30 days after deposit received
Warranty: at least 25 years
Specificationi of Single Tubular Tower:
| Material |
Angle steel plates, flat steel plate, bolts and nuts |
| Steel Type |
Weldable low carbon structural steel |
| Steel Grade |
GB Q235, Q345, BS 4360, ASTM A36 etc. |
| Yield Strength |
Fy≥235MPa |
| Tensile Strength |
Fu≥400MPa |
| Elongation |
σ≥20% |
| Surface Finish |
Hot dip galvanization |
| Galvanized layer |
T≥65μm |
| Height |
20m to 100m, customized to requests |
| Design |
4 legs self-supporting or free standing lattice tower |
| Structure |
1 to 5 platforms, each platform comes with 4 to 6 brackets for mounting antennas or specified number of brackets for mounting antennas, microwaves, RRUs and other devices. |
| Supply mode |
CKD(Complete Knocked Down), SKD(Semi-Knocked Down), DKD(Direct Knocked Down) |
| Fixing/Fastening |
Bolts and nuts, connecting plates |
| Configuration |
Foundations/anchoring bolts, tower sections, 1-5 platforms (optional), mounting brackets, ladder, anti-fall safety system, lightning rod, earthing plate etc. |
| Wind Load |
0.35-1.0kN/sqm |
| Lifespan |
20-50 years |
| Warranty |
3 years |
| Applications |
GSM/3G/4G/5G/FM radio antennas, microwaves, telecom stations. |
Monopole tower
Single tube tower also called monopole tower, is a commonly used type, with beautiful appearance, covering an small area of 9 to 18 square meter, cost - effective , and is adopted by majority of the construction. Tower body adopt more reasonable section, which is connected through high strength bolt. It has the characteristics of easy installation and can adapt to a variety of complicated field site.
Self Supporting Tower
Self supporting tower usually is 3leg of 4leg tower, and its material is steel pipe or angle steel. As for the connection, tubular tower is connected by flange, and angle steel tower is connected by nuts and bolts.
Features:
1.Small coefficient of wind load, strong wind resistance.
2.Save land resource, convenient location.
3.Convenient transportation and installation.
The 35m Telecommunication Steel Monopole Tower for 5G antenna is optimized for medium to heavy loads which is used for standard cellular sites.
Altai towers can be equipped with a variety of accessories, such as work or rest platforms, antenna mounts, safety devices,
obstruction lights, lightning protection kit and more. All of the accessories can be installed at any desired height and
orientation according to customer Specification.
![]()
50m Monopole Steel Tower With Antenna Wifi Signal Microwave
