Camouflage Palm Tree Tower Pin Tree Concealment With Galvanized
Camouflage Palm Tree Tower Pin Tree Concealment with Galvanized
Specifications of Antenna Mast:
| Descriptions | Artificial palm tree Steel pole for landscaping and mounting communication antennas, microwaves, RRUs etc. as camouflaged telecom tower |
| HS Code | 7308900000 |
| Material | Weldable structural carbon steel |
| Grade | GB Q235, Q345, BS4360, ASTM A36 etc. |
| Yield Strength | 235-355MPa |
| Height | 5m to 50m or other specified height |
| Thickness | 4mm to 20mm, depending on height of pole. |
| Pole Shape | Conical/tapered, straight round/cylindrical, square or rectangular, polygonal etc. |
| Diameter or Dimensions | Subject to height of pole and required mechanical properties. |
| Design | Single, dual or multiple platforms and brackets |
| Surface Finish | Hot dip galvanization plus bionic cortex |
| Galvanization | 65-100 Microns |
| Cortex and leaves | fiberglass and polymer resin |
| Color | artificial palm green leaves and brown cortex |
| Applications | landscaping and GSM, radio, 3G/4G/5G microcell, macrocell and other communication signal transmission and distribution. |
These towers are used for cellular radio base stations in urban areas where there is a need to reduce their visual impact on the environment. Guangxin Communication offers an efficient solution in the form of artificial tree that is functional like any other regular telecommunication tower. Their main advantages include reduced environmental impact and modularity of accessory components.
SUPORTING STRUCTURE is composed of individual polygonal or circular poles made up of several shafts kept together by slip-on joints. Shafts are covered with material very similar to the tree bark. Base shaft is flange connected to the foundation with anchor bolts.
FOUNDATION ANCHOR BOLTS are made up of steel rods which are cast in the reinforced concrete foundations and positioned by template included in the supply.
CLIMBING LADDERS are anchored outside or inside of the pole tower and can be equipped with safety climbing system.
FEEDERS & CABLE run down the through the inside of the trunk.
ANNTENA MOUNTS are integral part of a supporting structure.
LIGHTNING & GROUNDING PROTECTION and LIGHTS Towers are equipped with appropriate system of lightning and grounding protection and tower lightning system according to the technical requirements or customers request
TECHNICAL SPECIFICATIONS STRUCTURE CALCULATION The structure calculation was performed according to current Serbian standards and regulations.
WIND LOAD TWIST & SWAY OF THE TOWER TOP Number and type of antennas that can be placed on the pole as well as maximum twist and sway are given in Table 3 and Scheme 3. MATERIALS All used materials comply with the requirements of the European Standards (EURONORM). Structural parts: S355JO (JUS EN 10027-1) S235JRG2 (JUS EN 10027-1) Nuts and bolts: quality 10.9 CORROSION PROTECTION All steel materials are protected by hot-dip galvanizing in accordance with the current standards. Basic wind speed resistance is equivalent to 30m/s. Characteristics used for the calculation: ice thickness 0.02m
Galvanized Steel Pipes Monopole Artificial Trees and Plants
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.