Cable Wire Stripping And Crimping Machine CX-2000A Power Cord Making 3 / 4 Cores
CX-2000A 3/4 Cores Cable Stripping Cutting Crimping Machine
Function
1. The wire is threaded into the designated hole, the core wire is drawn to different lengths, the core wire is cut and stripped, crimping 1, crimping 2, crimping 3, the manipulator takes out the wire.
2. The finished product can be produced as shown in the picture on the right.
Types of terminals that can be crimped: 3 types of terminals can be selected for crimping at the same time, 250 terminals, ground ring, 187 terminals, flag-type terminal and other terminals can be selected at will.
Technical Parameter
| Voltage & Frequency | AC220V / 50Hz |
| Air pressure | 0.6-0.7Mpa |
| Capacity | 700-1,000pcs/hr(1 step 3.5/sec) |
| Applicable wire | 0.5-1.0sqmm are universal, 1.5-2.5sqmm are universal |
| The number of people can be saved | 3-4 worker |
| Dimension | L 1,620mm * W 1,200mm* H 1,400mm (floor space) |
| Weight | 560kg |
| Applicable terminal | 1 or 3 types of terminal optional |
| Cutting in different length tolerance | 0-260mm adjustable |
Configuration List
| Name | Brand |
| Servo | LEADSHINE |
| PLC | XINJE |
| Stepper motor | LEADSHINE |
| Camera | Basler/Hikvision |
| proximity switch | Taiwan |
| Low voltage electrical appliances | CHINT/YIJIA |
| The electromagnetic valve | Airtac/ EMC |
| cylinder | Aitac |
| floating join | Airtac |
| Linear Guides | Hi-win/CCT |
| bearing | HCH |
| screw | CCT |
| Support seat | CCT |
Power Cord Making 3/4 Cores Cable Wire Stripping Crimping Machine Finished Product:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.