Alloy 174 ASTM B768 Beryllium Bronze Strips With State HT TH04 For Fuse Clips
Alloy 174 (ASTM B768) Beryllium Bronze Strips With State HT(TH04) For Fuse Clips
Product Name: Beryllium bronze strips
Grade: Alloy 174(ASTM B768)
Size: 0.25mmx200mm, Or as customers' requirement
State: 1/2 HT(TH02), HT(TH04)
Chemical Composition of Alloy 174 (ASTM B768) Beryllium Bronze:
| Cuberyllium Brand | UNS-Number | Beryllium | Cobalt | Nickel | Cobalt + Nickel |
+Cobalt + Nickel + Iron |
Lead | Copper |
| Cuberyllium-C741 | C17410 | 0.15-0.50 | 0.35-0.60 | _ | _ | _ | _ | Balance |
Other Designations of Alloy 174 (C17410):
Equivalent material to UNS C17410 copper alloy is ASTM B768.
Typical Physical Properties of Alloy 174 (ASTM B768) Beryllium Bronze:
| Elastic Modulus | Melting Point (Solidus) | Electrical Conductivity/ Resistivity |
Density |
| 138 GPa | 1020 °C | 2.9-3.8 μΩcm | 8.80 g/cm3 |
Thermal Properties of Alloy 174 (C17410):
| Properties | Metric | Imperial |
|---|---|---|
| Thermal expansion co-efficient (@20-200°C/68-392°F) | 18 µm/m°C | 10 µin/in°F |
| Thermal conductivity | 230 W/mK |
1600 BTU in/hr.ft².°F |
MECHANICAL PROPERTIES of C17410 Alloy 174 (ASTM B768) Beryllium Bronze Strips:
| 0.2% Offset Yield Strength (min) | Ultimate Tensile Strength (min) | Elongation (min) | ||||
| Temper | Hardness | |||||
| ksi | MPa | ksi | MPa | % | HV | |
|
1/2HT(TH02) |
80 - 100 | 550 - 690 | 95 - 115 | 665 - 790 | 10~20 | 180 - 230 |
| HT(TH04) | 100 - 120 | 690 - 830 | 110 - 130 | 760 - 895 | 7~17 | 210 - 278 |
Product Photo:
Weldability
Soldering, brazing, gas shielded arc welding, coated metal arc welding, spot welding, seam welding and butt welding are all recommended
Hot & Cold Workability
Good hot working properties. Excellent cold working properties.
Health and Safety
Processing beryllium-containing alloys poses a health risk if safe practices are not followed. Inhalation of airborne beryllium can cause serious lung diseases in some individuals. Occupational safety and health regulatory agencies worldwide have set mandatory limits on occupational respiratory exposures. Read and follow the guidance in the Safety Data Sheet (SDS) before working with this material.
For questions on safe practices for beryllium-containing alloys, contact us by e mail at info@cuberyllium.com
FAQ:
Q1:Could you produce Beryllium Copper strip by Mill Hardened process.
A1:Yes, we could produce AM(TM00), 1/2HM(TM01).HM(TM04) XHM(TM06) XHMS(TM08).,we are the only factory could do mill harden strip in China.
Q2: What’s the advantages the Beryllium Copper of CUBERYLLIUM®.
A2: 1: The Biggest Coil weight could be reach 1200kg/Coil
2:We are the only one who melting by Vacuum semi-Continuous Furnace.
3:Surface further polishing for top clients.
Q3: Why you melting by Vacuum semi-Continuous Furnace.
A3:Could be get the Cast ingot without gas,smaller segregation, Grain Refinement
Q4: What's the payment terms?
A4: We accept T/T, L/C, Paypal etc. It can be negotiated when the amount is different.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.