Copper Beryllium Strip UNS. C17200 (CuBe2) 0.28mm x 100mm State XHM
Product Normal Description:
Product Name: Copper beryllium strip
Grade: UNS. C17200 (CuBe2)
Standard: ASTM B194, SAE J463, J461
Product Specification: 0.28mmx100mm
State: XHM
Product Brand: CUBERYLLIUM®
 
Chemical Composition of Copper Beryllium Alloys UNS. C17200 (CuBe2):
Beryllium(Be): 1.80-2.00%
Cobalt(Co) + Nickel(Ni): 0.20% Min
Cobalt(Co) + Nickel(Ni) + Iron(Fe): 0.60% Max
Lead: 0.02% Max
Copper(Cu): Balance
Note: Copper plus additions equal 99.5% Minimum.
 
The principle characteristics of alloy 172 are an excellent response to precipitation-hardening treatments, excellent thermal conductivity, and resistance to stress relaxation. The high strength beryllium coppers C172 can be purchased in the solution annealed or cold worked tempers and can be easily formed or machined. A low-temperature heat treatment (600 degrees for 2-3 hours) produces maximum strength and hardness. C17200, also commonly known as Alloy 25, CuBe2, is available in round rod, bar, tube, strip, and wire.
 

 
Typical Physical Properties of Copper Beryllium Alloys UNS. C17200 (CuBe2):

 
 
Fabrication Properties of Copper Beryllium Alloy UNS. C17200 (CuBe2):

 
Product Package of Copper Beryllium Alloys:
Usually we pack the beryllium copper strips on coil, outside is plywood case.
 
 
Key Technology of Beryllium Copper(Heat treatment)
Age Hardening
Age hardening significantly enhances the material’s strength. This reaction is generally carried out at temperatures between 260°C and 540°C depending on alloy and desired characteristics. This cycle causes the dissolved beryllium to precipitate as a beryllium rich (gamma) phase in the matrix and at the grain boundaries. It is the formation of this precipitate which causes the large increase in material strength. The level of mechanical properties attained is determined by the temperature and time at temperature. It should be recognized that beryllium copper has no room temperature aging characteristics.