Hendrickson Trailer S22045 HK190T Air Suspension Spring Firestone W01-358-8755 Goodyear 1R13-124 VKNTECH 1K8755

HENDRICKSON TRAILER S22045(HK190T) Air Suspension SPRING Firestone W01-358-8755 Goodyear 1R13-124 VKNTECH 1K8755

OEM Numbers

Product Drawing

Specification

Air Spring Installation

• Before you start installing air springs, make sure you have all the necessary tools and equipment to perform the repair safely.
• Familiarize yourself with the suspension on which you are performing the repair by reviewing the manufacturers service guide.
• If you are in doubt about something, ask for assistance from a qualified suspension specialist, the suspension manufacturer or the air spring manufacturer; This can save you a lot of time and aggravation later in the job.

Important tips to remember when installing a new unit

• Check levelling valve, linkage and transmission parts for wear and damage and if necessary replace the damaged parts.

• Check that the shock absorber for leakages and take a shock absorber test. A defective shock absorber must be replaced.

• Once the air lines are disconnected, check their entire length for cracks or other damage. Replace worn parts.

• With the air spring removed, other parts of the air suspension become more accessible. Check for wear or damage of the frame hangers, trailing arm bushings, torque rods, the trailing arms and the air spring mounts. When it is necessary, also replace parts.

• Check bearing for air spring bellow for external damage, deformation, sharp edges and correct fastening.

• Before installing the new unit, clean the air spring mounting plates to ensure proper attachment to the suspension.

• Always use new attaching bolts for the installation and observe the tightening torques. Never use old bolts, because these can fall out.

• Check the linkage of the levelling valve to see that it is functioning properly. Under load, the linkage should move from the neutral position up to the intake position. This lets air into the springs, which brings the arm back to the neutral position. This lets air into the springs, which brings the arm back to the neutral position. That opens the exhaust valve, allowing air to escape until the arm returns to the neutral position. Then check the driving level.

Guangzhou Viking Auto Part Ltd is a Chinese supplier that has been in the business of manufacturing air springs for 15 years. We have established ourself as a reliable and trustworthy manufacturer of high-quality air springs, air pumps, and air shocks for truck trailers and buses. Our company has a 30,000 square meter factory and an in-house lab, which ensures that our products meet strict quality standards.

Welome to contact us.

Contact: Cindy Huang

wechat: 0086-13928831072

whatsapp:0086-13527661764

email:sales@vkairspring.com