4000pcs Per Hour Rotary Pulp Egg Tray Moulding Machine For Chicken Eggs
4000pcs per hour paper egg tray making machine egg tray production line for chicken eggs
Machine Introduction:
1.Pulp Moulding production line is known as egg tray line for using massively in produce egg tray.
2.Pulp Moulding production line, which uses waste paper, cardboard, leftover material of paper mill, by hydraulic pulper, mix making a certain dense pulp, and pulp is absorbed by vacuum of special metal moulding to become wet products, through drying , and shaping to become finished products.
3.Pulp Moulding Line processing makes use of recycled water and does not lead to water or air pollution. Finished packaging products can be recycled after being used in storage, transport, and sales. After shredding, they are easy to be decomposed as paper, even if discarded into the natural environment.
4.Automatic pulp molding production lines can be mass production of various food container, egg tray, lunch boxes and so on.
Processing Type: Pulp Molding Machine
Approval: CE
Warranty: 12 Monthes
Rotary: 2 /4 /8 /12 Faces
Forming Platen Size: 1200 x 400 mm / 1470 x 470 mm / 2850 x 470 mm
Capacity: 4000 pcs/hr (30-egg tray)
Matches with 1-layer brick dryer, energy efficient and conserve energy
CE approved egg tray machine price equipped with automatic hot pressing and intelligent conveying stacking technology.
Mainly applied for egg tray, egg carton, fruit tray, cup carrier, bottle tray etc.
Specification:
|
Tech Date |
|
| Production name | 4000pcs per hour paper egg tray making machine egg tray production line for chicken eggs |
| Model | 4by8 rotary type |
| Production Capacity | 4000pcs/h |
| No. of Molds | 32pcs forming molds plus 4 pcs transfer molds |
| Products can be made | Egg tray 30 holes, egg box 12 cavity etc by changing mold |
| Labor needed | 5 |
| Machine color | Can customize as per clients, like grey, silver, blue |
| Template Size | 1470mm*470mm |
| Dimension |
2300*1800*1800mm |
| Voltage | 380V,voltage can be customized |
| Power8 | 130kw |
| Rotary speed | 20-23 times per minute |
| Drying method | Brick drying line or metal drying line |
Moulding Machine Advantages:
Our Wongs six-layer metal drying line is mainly composed of a combustion chamber, an upper air duct, a lower air duct, and drying tunnel running by chains and pallets. Every two adjacent sections need to be fixed with hexagonal screws for drying. The slideway and the wind plate have been welded before leaving the factory. After the customer receives the goods, they only need to install the chain and the pallet.
Finished products by changing molds
The Production Line Composition
Pulping system
(1) Put the raw material into the pulper and add an appropriate amount of water for a long time to stir the waste paper into pulp and store it in the storage tank.
(2) Put the pulp in the slurry tank into the pulping tank, adjust the pulp concentration in the pulping tank, and further stir through the agitator through the white water of the return pool and the thick slurry of the storage tank. After adjusting to the applicable pulp, put it into the feeding pool to be used in the molding system.
Equipment used: pulping machine, agitator, pulp pump, vibrating screen, pulp disintegrator
2. Forming system
(1) The pulp in the supply tank is supplied into the molding machine, and is adsorbed by the vacuum system, and the pulp is left on the mold by the mold on the equipment to be formed, and the white water is sucked and transported back into the pool through the vacuum pump.
(2) After the mold is adsorbed, the transfer mold is blown out by the positive pressure of the air compressor, and the molded product is blown from the molding die to the rotary mold, and is sent out by the transfer mold.
Equipment used: molding machine, mold, vacuum pump, vacuum tank, pump, air compressor, mold cleaning machine
3. Drying system
(1) Natural drying method: The product is dried directly by weather and natural wind
(2) Traditional drying: brick tunnel kiln, heat source can choose natural gas, diesel, coal, dry wood,A heat source such as liquefied petroleum gas.
(3) New multi-layer drying line: 6-layer metal drying line can save more than 30% energy compared to transmission drying. The main heat source is clean energy such as natural gas, diesel oil, liquefied petroleum gas and methanol.
4. Finished product auxiliary packaging
(1) Automatic stacking machine
(2) Baler
(3) Transfer conveyor
Our Service
Pre-sales service
With more than 30 years of accumulated technical experience, we will be based on your investment intentions, such as capital, plant, target market and other details of a full range of analysis.
On sale service
1.According to your internal size of the workshop, we will not only provide you detailed layout, the planning of pipe and line design, also provide basis of your equipment infrastructure construction, procurement and installation of materials.
2.When equipment into the factory, by the capable installation team to install and debug; After commissioning, the staff training of the system, including two parts: classroom explanation and practice, the structure of the equipment, principle and production technology, day-to-day maintenance and common troubleshooting and other contents of the detailed explanation and practical exercises.
After-sale service
The equipment we sold: "Lifelong tracking service, one year free warranty" (except for vulnerable parts and abnormal failure), one year after, the cost of spare parts and service.
Photos for show
Brick drying line
Metal drying line
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.