HDG Hanger Riser Pipe Clamp Sz3/8 Inch Heavy Duty Pipe Hangers Ss316 Powder Coated

HDG Powder Coated Hanger Riser Pipe Clamp

Products: Riser Clamp

A Riser clamp is a type of hardware used by mechanical building trades for pipe support in vertical runs of piping at each floor level. The devices are placed around the pipe and integral fasteners are then tightened to clamp them onto the pipe. The friction between the pipe and riser clamp transfers the weight of the pipe through the riser clamp to the building structure. Risers are generally located at floor penetrations, particularly for continuous floor slabs such as concrete. They may also be located at some other interval as dictated by local building codes or at intermediate intervals to support plumbing which has been altered or repaired. Heavier piping types such as cast iron require more frequent support. Ordinarily, riser clamps are made of carbon steel and individually sized to fit certain pipe sizes. "Riser" refers to vertical runs of pipes, electrical conduit and tubes.

Features: 

Riser Clamp or guides provide attachment support when a cable or pipeline is required to run vertically up the side of a platform.

The location and fixing geometry of each Riser Clamp may vary considerably due to the complexity of a platform structure and the exact geometric shape can be achieved for each location.
The Riser Clamp can be installed onto the side of existing platforms or structures, with the base section being installed first, followed by the riser and retaining cap.

Applications:

The Steel Riser Clamp is designed for the support or steadying of vertical risers.It is made of carbon steel and is designed to hold tight to the pipe,transmitting the load to the structure through the ears on each end.When possible the clamp should be placed under a coupling,hub,or lugs welded to the pipe.

Certification:

Product Show: