Brick Reinforcement Mesh with hot galvanized 100mm coil width for Construction fields

Brick Reinforcement Mesh Introduction: 

Embedded in the normal thickness of a brickwork joint, expanded metal reinforcement reduces the detrimental effects of vibration and changes of temperature. The application gives brickwork increased resistance to tensional stresses. The brickwork reinforcement (coil mesh) assists resistance to tensile stresses where settlement occurs. Easily incorporated into mortar course, coiled for ease of handing.

Brick Reinforcement Mesh Specification:

Hole Type: Diamond

Hole Size: 12*25mm

width: 6.5cm,8cm,10cm, 15cm, 20cm,25cm,30cm

Length: 10m-100m

Brick Reinforcement Mesh Installation: 

The coil mesh is laid in strips between brick or block courses leaving approximately 25mm clearance from the faces of the work. Where coil mesh joins are required, ensure they overlap by at least 75mm. The reinforcement is then simply embedded in the mortar for the next course.

In most instances, application ever y third course, for the full length of the wall, will be sufficient.

To reinforce brickwork at an opening, e.g. window or door, mesh should be installed to overlap part of the opening, and part of the solid wall.

Thinking of the width of the opening, lay the mesh approximately a quarter of the way across the opening. The mesh should lie the same distance again, across the solid wall.

Brick Reinforcement Mesh Application:

concrete slabbing, roads, paving, foundations, marine work, bank strong rooms, partition slabs, concrete block work, asphalt guttering etc.